Wire Harness DC Handle/PCB Commercial #4 with Two #11 Posts For Battery ULW, #10 neck Coupling Back And #12 Cable Cover. D223-6000

Compatible with Tornado Roam 97300/Roam 97300C, Riccar R10CV, Simplicity S10CV/SC10CV, CleanMax Zoom ZM-800, the Handle / PCB Wiring Harness (part# D223-6000) is a genuine Tacony OEM component. As a genuine Tacony component, the D223-6000 is shared across Tornado Roam 97300 and Roam 97300C; Riccar R10CV; Simplicity S10CV and SC10CV; CleanMax Zoom ZM-800.

On the Tornado Roam / 97300 / 97300C, this harness routes power and signal between the battery posts, control board, and switch through the handle and neck of the machine. Supplied complete with its battery posts, neck coupling, and cable cover, part# D223-6000 restores the entire upper electrical run in one part so the controls, charging, and motor power all connect reliably.

Install the harness when wiring in the handle or neck is chafed, broken, or corroded, when the battery posts are damaged, or when the machine has intermittent power or control faults traced to the upper wiring. Because it carries the main battery and control connections, it is best fitted by someone familiar with the machine’s electrical layout.

Compatible Models for the Handle / PCB Wiring Harness

Part# D223-6000 is a genuine Tacony component shared across multiple brands. Verified fitment covers the following models:

• Tornado: Roam 97300, Roam 97300C
• Riccar: R10CV
• Simplicity: S10CV, SC10CV
• CleanMax: Zoom ZM-800

Twin City Vacuum has been selling and servicing Tornado equipment since 1956, and the Handle / PCB Wiring Harness (part# D223-6000) ships from our shop at 5415 West Broadway, Crystal, MN 55428. Browse the complete Tornado Roam 97300 / 97300C parts catalog for matching components, or view the machine on the manufacturer’s site at tornadovac.com.

Frequently Asked Questions

What does the handle/PCB wiring harness do on the Roam?

The handle/PCB wiring harness (part# D223-6000) is the complete upper wiring assembly that carries power and control signals between the handle switches/PCB and the battery and motor. It is supplied as a kit that also bundles two battery posts, the back neck coupling, and the cable cover, so one part covers the whole upper wiring job.

My Roam loses power intermittently or a control stops responding — could the harness be at fault?

Yes: chafed or broken wires at the handle, dead switches, or flickering power all point to the harness. Replacing the whole D223-6000 rewires the upper machine in a single step rather than chasing individual broken leads.

Does the D223-6000 include the neck coupling and cable cover?

Yes — this assembly bundles the wiring harness with two battery-post connections, the back neck coupling (#10), and the cable cover (#12), so you do not need to order those separately when doing a full rewire. That bundling is why it carries a D-series assembly number.

Which machines use the handle/PCB wiring harness (part# D223-6000)?

It fits the Tornado Roam 97300 and 97300C; see the Compatible Models list above for the exact machines that share this assembly.

Questions about the Handle / PCB Wiring Harness (part# D223-6000)? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.