Bracket X9085

The Bracket (part# X9085) is a genuine Tacony OEM replacement part from the recovery and solution tank assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is a formed steel bracket that mounts and locates a component on the tank assembly.

What the Bracket does

This bracket carries a component on the tank assembly, holding it in position and transferring its weight and vibration into the machine structure rather than into the part itself. On a machine where a vacuum motor and a pump run together, the bracket spends its whole life damping a constant buzz.

When to replace the Bracket (X9085)

Replace it when it is bent, cracked at a bend or a bolt hole, or when the holes have elongated enough to let the mounted component shift. Elongated holes are the common failure and they allow movement that then chafes hoses or throws a drive out of line.

Bracket X9085 — fitment and installation notes

Check what loaded the old bracket before fitting a new one. A bracket that cracked usually did so because something else was loose or misaligned; fit a new bracket into the same fault and it will fail the same way. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.

Compatible Models for the Bracket

• Tornado Marathon SE 900 — Model 98170
• Powr-Flite Prowler PFX900S
• Powr-Flite PFX900SG

Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.

Frequently Asked Questions

What does the Bracket do on the Tornado Marathon SE 900?

This bracket carries a component on the tank assembly, holding it in position and transferring its weight and vibration into the machine structure rather than into the part itself. On a machine where a vacuum motor and a pump run together, the bracket spends its whole life damping a constant buzz.

How do I know if my Bracket needs replacing?

Replace it when it is bent, cracked at a bend or a bolt hole, or when the holes have elongated enough to let the mounted component shift. Elongated holes are the common failure and they allow movement that then chafes hoses or throws a drive out of line.

What models is the Bracket (part# X9085) compatible with?

The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.

How do I order the Bracket (part# X9085) or get help?

You can add the Bracket (part# X9085) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.