Gasket X9097

The Gasket (part# X9097) is a genuine Tacony OEM replacement part from the chassis assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the sealing gasket that closes the joint between a panel or door and the surface it seats against.

What the Gasket does

A gasket in this position is doing airflow work as much as water work. On a machine that generates vacuum, an unsealed panel is a hole the vacuum motor pulls through, and the air it steals is air that is not lifting water out of the carpet. The result reads at the wand as poor recovery, and nothing on the panel itself looks wrong.

When to replace the Gasket (X9097)

Replace it when it has compressed flat and no longer springs back, when it has torn, gone hard, or lifted from its channel, or when the panel has to be forced to seal. A useful check is a strip of paper closed in the joint at several points; if it pulls out freely anywhere, the gasket is not making contact there.

Gasket X9097 — fitment and installation notes

Remove the old gasket and its adhesive residue completely so the new one sits at the right height, since a gasket laid over old material seals unevenly. Fit it without stretching, butt the ends rather than overlapping them, and let any adhesive set before the panel is closed for the first time. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.

Compatible Models for the Gasket

• Tornado Marathon SE 900 — Model 98170
• Powr-Flite Prowler PFX900S
• Powr-Flite PFX900SG

Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.

Frequently Asked Questions

What does the Gasket do on the Tornado Marathon SE 900?

A gasket in this position is doing airflow work as much as water work. On a machine that generates vacuum, an unsealed panel is a hole the vacuum motor pulls through, and the air it steals is air that is not lifting water out of the carpet. The result reads at the wand as poor recovery, and nothing on the panel itself looks wrong.

How do I know if my Gasket needs replacing?

Replace it when it has compressed flat and no longer springs back, when it has torn, gone hard, or lifted from its channel, or when the panel has to be forced to seal. A useful check is a strip of paper closed in the joint at several points; if it pulls out freely anywhere, the gasket is not making contact there.

What models is the Gasket (part# X9097) compatible with?

The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.

How do I order the Gasket (part# X9097) or get help?

You can add the Gasket (part# X9097) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.