Operating Instruction Label X9057
$6.58
Genuine Tacony OEM operating instruction label (part# X9057) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S. The printed sequence an operator reads at the machine, and the part inspectors look for when a rental or contract machine is checked in.
The Operating Instruction Label (part# X9057) is a genuine Tacony OEM replacement part from the recovery and solution tank assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the printed instruction decal that carries the step-by-step operating sequence for the machine.
What the Operating Instruction Label does
This label is the machine talking to whoever is standing in front of it. On a self-contained extractor the fill, spray, pass and dump sequence matters, and the label puts that sequence where an operator can read it without going to find a manual that left the building years ago. On rental machines and multi-operator crews it is often the only instruction that ever gets read, which is why a missing one shows up as misuse rather than as a cosmetic complaint.
When to replace the Operating Instruction Label (X9057)
Replace it when the print has faded, the surface has been scrubbed dull by cleaning chemicals, or a corner has lifted and started peeling. Solution splash and defoamer are hard on printed vinyl, so a label on a working machine usually goes soft and illegible long before the machine does.
Operating Instruction Label X9057 — fitment and installation notes
Clean and dry the mounting area completely before applying, and let solvent flash off so the adhesive is not sitting on a wet surface. Peel the old label rather than sanding it, and apply from one edge with steady pressure so no air is trapped under the print. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Operating Instruction Label
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Operating Instruction Label do on the Tornado Marathon SE 900?
This label is the machine talking to whoever is standing in front of it. On a self-contained extractor the fill, spray, pass and dump sequence matters, and the label puts that sequence where an operator can read it without going to find a manual that left the building years ago. On rental machines and multi-operator crews it is often the only instruction that ever gets read, which is why a missing one shows up as misuse rather than as a cosmetic complaint.
How do I know if my Operating Instruction Label needs replacing?
Replace it when the print has faded, the surface has been scrubbed dull by cleaning chemicals, or a corner has lifted and started peeling. Solution splash and defoamer are hard on printed vinyl, so a label on a working machine usually goes soft and illegible long before the machine does.
What models is the Operating Instruction Label (part# X9057) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Operating Instruction Label (part# X9057) or get help?
You can add the Operating Instruction Label (part# X9057) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
