Float Cage w/Neck and Heavy Ball X9053
$39.99
Genuine Tacony OEM float cage assembly with neck and heavy ball (part# X9053) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S. The shut-off that stops recovery water reaching the vacuum motor when the tank fills.
The Float Cage w/Neck and Heavy Ball (part# X9053) is a genuine Tacony OEM replacement part from the recovery and solution tank assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the float shut-off assembly that seals the vacuum path when recovery liquid reaches the full level.
What the Float Cage w/Neck and Heavy Ball does
The cage holds the ball in a controlled column above the recovery tank outlet. As the tank fills, the ball rises with the water and seats against the neck, closing the vacuum inlet before liquid can be carried into the motor. The cage matters as much as the ball, because it is what keeps the ball centred and stops debris and foam from jamming it partway up.
When to replace the Float Cage w/Neck and Heavy Ball (X9053)
Replace it when the ball no longer seals, when the cage is cracked or distorted, or when the machine has been letting water through to the motor even though the tank was not overfull. A ball that has been chemically etched or gone out of round will sit on the neck without ever sealing it.
Float Cage Neck X9053 — fitment and installation notes
Check the neck seat as well as the ball; a scored or deformed seat leaks with a perfect ball in it. Keep foam under control with defoamer, because heavy foam lifts the ball early and makes the machine seem to lose suction long before the tank is actually full. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Float Cage w/Neck and Heavy Ball
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Float Cage w/Neck and Heavy Ball do on the Tornado Marathon SE 900?
The cage holds the ball in a controlled column above the recovery tank outlet. As the tank fills, the ball rises with the water and seats against the neck, closing the vacuum inlet before liquid can be carried into the motor. The cage matters as much as the ball, because it is what keeps the ball centred and stops debris and foam from jamming it partway up.
How do I know if my Float Cage w/Neck and Heavy Ball needs replacing?
Replace it when the ball no longer seals, when the cage is cracked or distorted, or when the machine has been letting water through to the motor even though the tank was not overfull. A ball that has been chemically etched or gone out of round will sit on the neck without ever sealing it.
What models is the Float Cage w/Neck and Heavy Ball (part# X9053) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Float Cage w/Neck and Heavy Ball (part# X9053) or get help?
You can add the Float Cage w/Neck and Heavy Ball (part# X9053) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
