Baseplate B220-0314

The baseplate (part# B220-0314) is the structural bottom plate of the cleaning head on the Tornado Roam 97300 commercial upright — the molded panel the brushroll, wheels, and nozzle components all mount to.

On the Tornado Roam / 97300 / 97300C, the baseplate forms the underside of the nozzle and sets the ride height of the cleaning head across the carpet. It carries the front and rear wheels, houses the brushroll, and provides the sealing surface the baseplate cover and squeegee close against, so a straight, uncracked baseplate is what keeps airflow concentrated at the brushroll for consistent pickup.

Replace the baseplate if it is cracked, warped, or gouged, if the wheel or brushroll mounting points are broken, or if the machine has been dropped and no longer sits flat. A damaged baseplate shows up as uneven brush contact, scraping or rocking on hard floors, and air leaks that rob the nozzle of suction. Because it anchors everything below the motor housing, inspect it any time the cover is off for a belt or brushroll change.

Compatible Models for the Baseplate

Part# B220-0314 is a genuine Tacony component shared across multiple brands. Per PartSmart Where Used, it is confirmed compatible with the following models:

• Tornado: Roam 97300, Roam 97300C
• Riccar: R50TAP
• Powr-Flite: PRIMAP, WONDERP

Twin City Vacuum has been selling and servicing Tornado equipment since 1956, and the Baseplate (part# B220-0314) ships from our shop at 5415 West Broadway, Crystal, MN 55428. Browse the complete Tornado Roam 97300 / 97300C parts catalog for matching components, or view the machine on the manufacturer’s site at tornadovac.com.

Frequently Asked Questions

What does the Baseplate do on the Tornado Roam 97300?

The baseplate (part# B220-0314) is the molded bottom plate of the cleaning head on the Tornado Roam 97300 / 97300C. It supports the brushroll, wheels, and nozzle and sets the head’s ride height so the brush meets the carpet evenly.

How do I know if my Baseplate needs replacing?

Look for cracks, warping, deep gouges, or broken wheel and brushroll mounts. Rocking on hard floors, uneven brush wear, or suction loss from air leaking around the base all point to a baseplate that should be replaced.

What models is the Baseplate (part# B220-0314) compatible with?

Part# B220-0314 is a shared Tacony part confirmed by PartSmart to fit multiple models across Tornado, Riccar and Powr-Flite — including the Tornado Roam 97300 and 97300C. See the Compatible Models list above for the full breakdown, or call 763-535-0770 to confirm your exact machine.

How do I order the Baseplate (part# B220-0314) or get help?

You can add the Baseplate (part# B220-0314) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions about the Baseplate (part# B220-0314)? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.