Extension Cord 14/3 x 50′ Yellow 32217

$148.99

Genuine OEM 50 foot 14/3 yellow extension cord (part# 32217) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S. Correct gauge for the run length, and high-visibility so it is seen on a job site.

The Extension Cord 14/3 x 50′ Yellow (part# 32217) is a genuine OEM replacement part from the recovery and solution tank assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the 14 gauge three conductor 50 foot power cord supplied for running the machine at distance from an outlet. It also fits the Tornado 98168 20″ Marathon 1200 carpet extractor (12 Gallon 115V), all series (B, C, D, E, F and P).

What the Extension Cord 14/3 x 50′ Yellow does

Gauge and length go together on an extractor. A self-contained machine with heaters and a pump pulls real current, and running that load down an undersized 50 foot cord drops voltage at the machine, which makes motors run hot and shortens their life. The 14/3 rating is there so the machine sees the voltage it was designed around at the end of a full run, and the third conductor is the ground.

When to replace the Extension Cord 14/3 x 50′ Yellow (32217)

Replace it when the jacket is cut, cracked, or has been taped, when a plug or connector body is loose, bent, or heat-discoloured, or when the ground pin is damaged or missing. Cord damage is not a cosmetic issue on a machine that carries water.

Extension Cord Yellow 32217 — fitment and installation notes

Uncoil the cord fully before running the machine, because a coiled cord under load builds heat. Keep it out of the wet path and off traffic lines where it will be run over, unplug by the plug body rather than by pulling the cord, and never defeat the ground pin to fit an older outlet. The Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S are the same machine platform sold under two brand names, so this component carries across both rather than belonging to either one. It is a shared component across the Tornado and Powr-Flite lines and may fit additional models beyond those listed — call us and we will confirm against your serial number.

Compatible Models for the Extension Cord 14/3 x 50′ Yellow

Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine OEM parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.

Frequently Asked Questions

What does the Extension Cord 14/3 x 50′ Yellow do on the Tornado Marathon SE 900?

Gauge and length go together on an extractor. A self-contained machine with heaters and a pump pulls real current, and running that load down an undersized 50 foot cord drops voltage at the machine, which makes motors run hot and shortens their life. The 14/3 rating is there so the machine sees the voltage it was designed around at the end of a full run, and the third conductor is the ground.

How do I know if my Extension Cord 14/3 x 50′ Yellow needs replacing?

Replace it when the jacket is cut, cracked, or has been taped, when a plug or connector body is loose, bent, or heat-discoloured, or when the ground pin is damaged or missing. Cord damage is not a cosmetic issue on a machine that carries water.

What models is the Extension Cord 14/3 x 50′ Yellow (part# 32217) compatible with?

The Extension Cord 14/3 x 50′ Yellow (part# 32217) fits the Tornado Marathon SE 900 — Model 98170, Powr-Flite Prowler PFX900S, Powr-Flite PFX900SG and the Tornado 98168 20″ Marathon 1200 Carpet Extractor (12 Gallon 115V) — all series (B, C, D, E, F and P). If your machine is not on that list, call us at 763-535-0770 with the model number and we will confirm before you order.

How do I order the Extension Cord 14/3 x 50′ Yellow (part# 32217) or get help?

You can add the Extension Cord 14/3 x 50′ Yellow (part# 32217) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.