Adjustable Latch Assembly 62200005
$29.99
Genuine OEM adjustable latch assembly (part# 62200005) for Tornado floor scrubbers. It is the over-centre closing lever that clamps the squeegee blade holders down, with adjustable tension.
Genuine OEM adjustable latch assembly (part# 62200005) for Tornado floor scrubbers — compatible machines are listed below. On the squeegee it is the over-centre closing lever that clamps the blade holders against the body, and it is adjustable so that clamping force can be set correctly as parts bed in and wear.
Adjustability is the point. The holder has to press a rubber blade evenly along its whole length: too little force and the blade lifts in places and streaks; too much and the blade is distorted, which also makes it lift. Over a holder’s life, the rubber compresses, the holder settles and the latch’s own linkage wears, so a latch set correctly a year ago is probably not set correctly now. That is an adjustment, not a repair — and it is the first thing to check when a machine starts streaking with blades that look fine.
The latch is also a convenience that gets abused. It is operated wet, with gloves, usually in a hurry, several times a week, and it is forced when it is stiff with dried detergent rather than cleaned.
Failures follow from that: a cracked hook or body, a worn or bent linkage that no longer goes over centre properly, a stripped adjuster so tension can no longer be set, and loss of spring tension so the latch closes without actually clamping.
Check it at every blade change: it should close with a definite over-centre action and hold the holder tight with no play. Clean a stiff latch rather than forcing it.
Compatible Models
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 26/27 — 99772
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 11 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the squeegee drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the adjustable latch assembly (part# 62200005) do?
It is the over-centre closing lever that clamps the squeegee blade holders against the body, with adjustable tension so clamping force can be set correctly as parts bed in and wear.
My blades look fine but the machine streaks. What should I check first?
The latch adjustment. Rubber compresses, the holder settles and the latch linkage wears, so a latch set correctly a year ago probably is not now. Too little force lets the blade lift; too much distorts it, which also makes it lift.
When should the latch be replaced rather than adjusted?
When the hook or body is cracked, the linkage is worn or bent so it no longer goes properly over centre, the adjuster is stripped, or it has lost spring tension and closes without clamping. Clean a stiff latch rather than forcing it — forcing is what breaks them.
How do I order the Adjustable Latch Assembly (part# 62200005) or get help?
You can add the Adjustable Latch Assembly (part# 62200005) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the adjustable latch assembly (part# 62200005) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet