Tornado Axle 1/2 in. x 14-1/2 in. X8816
$16.99
Genuine OEM 1/2 in. x 14-1/2 in. axle (part# X8816) for Tornado commercial high-speed burnishers — the long transport axle used on all three Brute Force burnishers (see full list below).
The X8816 is a 1/2 inch diameter axle, 14-1/2 inches long. It appears on every drawing in the Brute Force burnisher book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on both Brute Force 2000 Dust Control (98486) drawings. The 98486 drawings also list a shorter 13-3/4 inch axle (X1460) at a different callout, and the 98458B and 98482B list a 13-3/4 inch axle as X8936 — so there is more than one axle on these machines and the length is the thing to check. It is a shared part used across Tornado machines — see the full list of models below.
The axle carries the machine’s weight whenever it is tilted back and rolled, and it absorbs the shock of every threshold, kerb and van ramp. It runs through a wheel bore that collects floor finish, stripper and grit, which is an effective lapping compound — so axles on machines used for stripping work wear noticeably faster than on machines that only burnish.
Replace the X8816 if it is bent, worn down where the wheels ride, scored, or pitted by corrosion. A bent axle makes the machine crab rather than roll straight and gives visible wheel wobble; a worn one gives side-to-side play that lets the machine rock. Either way the wheels wear out quickly afterwards, so fitting new wheels to a worn axle is money thrown away.
Fit new wheels with a new axle unless the wheels are clearly sound, and renew the spring washer (X8101) and retaining hardware at the same callout as a matter of course. The axle is shared across the Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you want the correct axle length listed for your machine.
Compatible Models
- Tornado models:
- P Series 1600 Glazer (115V) — 98458
- Brute Force 1600 — 98458B
- P Series 1600 Glazer (230V) — 98459
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
- P Series 2000 Glazer (230V) — 98487
Frequently asked questions
What does the 1/2 in. x 14-1/2 in. axle (part# X8816) do on a burnisher?
It is a transport axle: it carries the machine’s weight on its wheels when the burnisher is tilted back and rolled, and absorbs shock from thresholds and ramps.
How do I know if my X8816 axle needs replacing?
Replace it if the machine will not roll straight, if the wheels wobble, if there is side-to-side play not explained by the wheels, or if the shaft is bent, worn, scored or pitted.
How many axles do these machines have?
More than one, and they differ in length. Besides the 14-1/2 inch X8816, the 98458B and 98482B list a 13-3/4 inch X8936 and the 98486 drawings list a 13-3/4 inch X1460. Always check the callout before ordering.
What models is the 1/2 in. x 14-1/2 in. axle (part# X8816) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the axle (part# X8816) or get help?
You can add the axle (part# X8816) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet