Base B016-1314C

$10.99

Genuine OEM nozzle base (part# B016-1314C) for the Tornado CK-LW 13/1 ProLite, models 97130 and 97131, and the Powr-Flite PF62EC. Call 763-535-0770.

The Base (part# B016-1314C) is the lower nozzle moulding of the Tornado CK-LW 13/1 ProLite, models 97130 (115V) and 97131 (230V), and of the Powr-Flite PF62EC. It is the part that meets the floor.

Everything about how this machine cleans is set by the base. It carries the brush roll, mounts the wheels and the pivots, and forms the suction opening across the full 13-inch width. Because it is the lowest part of the machine it is also the part that grounds out on thresholds and lifts over cable ramps, and the wear shows on the underside as a polished band along the front lip.

Compatible Models

  • Tornado CK-LW 13/1 ProLite, model 97130 (115V)
  • Tornado CK-LW 13/1 ProLite, model 97131 (230V)
  • Powr-Flite PF62EC

When a base needs replacing

Cracks through a wheel or pivot mounting are the clear case: once a mounting is broken the geometry cannot be held and no amount of replacing wheels will fix the tracking. The less obvious case is a base worn thin along the front lip, which changes the height of the suction opening and lets air in ahead of the debris. Lay a straight edge across the underside — the lip should be square, not rounded over.

Replacing the base is the natural moment to fit a new brush roll, belt and squeegee, since all three are already off, and to check the left and right pivots (part numbers B016-0600 and B016-0400) for play.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Call 763-535-0770 with your model and serial number and we will confirm the part before you order.

Frequently Asked Questions

Which machines does this base fit?

The Tornado CK-LW 13/1 ProLite, models 97130 and 97131, and the Powr-Flite PF62EC.

The machine will not track straight even with new wheels. Why?

Check the base for a cracked wheel or pivot mounting. Once a mounting has gone, the wheels cannot be held in the right relationship to each other and new wheels will not cure it.

What else should I change at the same time?

The brush roll (B012-3000), the belt (B014-0814B) and the squeegee (B015-2414B), because all three are already accessible, and check both pivots for play.

Reviews

There are no reviews yet

Be the first to review “Base B016-1314C”

Your email address will not be published. Required fields are marked *