Battery Terminal Wall Assembly with Switch X2527

The Battery Terminal Wall Assembly with Switch (part# X2527) is a genuine Tacony OEM replacement assembly for 36-volt cordless backpack vacuums in the Tornado and Powr-Flite ranges. It is the complete battery-bay terminal wall supplied built up — the moulded wall, the terminal block, the momentary switch on its mounting bracket, and the spring-loaded plunger, all fitted and ready to drop in.

Compatible Models for the Terminal Wall Assembly

• Tornado Pac-Vac 6 Roam — Models 93016, 93016B-1 and 93016C-1
• Powr-Flite Comfort Pro Freedom — CPF6P, CPF6P-1C and CPF6S

When to use the complete assembly rather than the individual parts: when the wall is cracked and the switch or terminal block has also been damaged; when the terminals show heat damage from a pack that has been seating loose; or simply when you would rather fit one assembly than strip and rebuild a wall on the bench. Every component in it is available separately, so this is a convenience and downtime decision, not the only route.

Fitting it is a single sub-assembly swap: the old wall comes out of the battery bay, the new one goes in on the same fixings, and the battery cover closes back over it. Because the switch and terminal block arrive already aligned on the wall, there is no adjustment to get wrong — the usual cause of a repeat failure is a wall rebuilt slightly out of true, and this assembly removes that step.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. The full parts breakdown for this machine is on our Tornado Pac-Vac 6 Roam parts page, and the manufacturer’s model information is at tornadovac.com.

Frequently Asked Questions

What does the Terminal Wall Assembly do on a cordless backpack vacuum?

It is the complete back wall of the battery bay. It carries the terminal block the battery pack connects to, the momentary switch and its bracket, and the spring-loaded plunger, and it sets the alignment the pack seats against.

How do I know if my Terminal Wall Assembly needs replacing?

Choose the complete assembly when the wall is cracked and the switch or terminal block is damaged too, when the terminals show heat damage from a loose-seating pack, or when you would rather fit one built-up assembly than rebuild the wall from separate parts.

What models is the Terminal Wall Assembly (part# X2527) compatible with?

The Tornado Pac-Vac 6 Roam in all three revisions — 93016, 93016B-1 and 93016C-1 — and the Powr-Flite Comfort Pro Freedom CPF6P, CPF6P-1C and CPF6S cordless backpack vacuums.

How do I order the Terminal Wall Assembly (part# X2527) or get help?

You can add the Battery Terminal Wall Assembly with Switch (part# X2527) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.