Tornado Brace Pivot Shaft 1/2 in. x 10 in. X8813
$11.99
Genuine OEM 1/2 in. x 10 in. brace pivot shaft (part# X8813) for commercial high-speed burnishers — the shaft the handle brace pivots on. Fits the Tornado Brute Force 1600 (98458B) and Brute Force 2000 (98482B).
The X8813 is the brace pivot shaft, 1/2 inch in diameter and 10 inches long. It appears on the Brute Force 1600 (98458B) main assembly drawing and on the Brute Force 2000 (98482B) drawing. Neither of the Brute Force 2000 Dust Control (98486) drawings lists it, so this listing names the two machines it fits. It is a shared part used across Tornado machines — see the full list of models below.
The brace pivot shaft is the lower of the two 1/2 inch shafts in the handle system. Where the handle pivot shaft (X8811, 10-1/2 inches) carries the handle itself, this one carries the handle brace (X1464) — the member that triangulates the handle to the body. Between them they fix the geometry of the handle, which is what makes the handle feel solid rather than springy.
Replace the X8813 if it is bent, worn in a step where the brace bears on it, or corroded and pitted. The symptom is a handle that flexes or springs when pushed sideways even though the clamp is tight, because a worn or bent brace shaft lets the triangulation move. Replacing the cam lever and clamp on a machine with a worn brace shaft produces a handle that is tight in the clamp and still loose in use — a common and frustrating mis-diagnosis.
Measure before you order: the X8813 and X8811 are only half an inch apart in length and look identical in a parts tray. Check the brace bores while the shaft is out, since a worn shaft usually comes with worn bores. The part is shared between the two non-dust-control Brute Force machines and carries no model name. Call 763-535-0770 with your model and serial number if you want it listed.
Compatible Models
- Tornado models:
- P Series 1600 Glazer (115V) — 98458
- Brute Force 1600 — 98458B
- P Series 1600 Glazer (230V) — 98459
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- P Series 2000 Glazer (230V) — 98487
Frequently asked questions
What does the brace pivot shaft (part# X8813) do on a burnisher?
It is the pin the handle brace pivots on. With the handle pivot shaft it fixes the handle geometry, which is what makes the handle feel solid rather than springy.
How do I know if my X8813 brace pivot shaft needs replacing?
Replace it if it is bent, stepped where the brace bears, or pitted by corrosion. The sign is a handle that flexes sideways in use even though the clamp is tight.
Does the X8813 fit the 98486 dust control glazer?
No. It appears only on the 98458B and 98482B drawings. Work from the 98486 drawings for that machine.
What models is the brace pivot shaft (part# X8813) compatible with?
The Tornado Brute Force 1600 (98458B) and the Brute Force 2000 High-Speed Glazer (98482B).
How do I order the brace pivot shaft (part# X8813) or get help?
You can add the brace pivot shaft (part# X8813) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet