Brush Plate Mounting Flange 21002010

$30.99

Genuine Tornado brush plate mounting flange (part# 21002010) — fits 10 Tornado scrubber models including the BDSO 27/28. Mounts the brush holder plate to the transmission output.

Genuine Tornado brush plate mounting flange, part number 21002010, used on 10 Tornado scrubber models including the BDSO 27/28. The flange is the metal hub that bolts to the transmission output shaft and carries the brush holder plate. Everything the brush does — torque, side load, the shock of catching an edge — passes through this flange on its way into the gearbox.

Flanges do not wear out so much as get damaged. A deck that is run into an obstruction hard enough can bend the flange, and a bent flange makes the brush run out of true: the deck vibrates, the brush wears in a ring rather than evenly, and the transmission bearings take a cyclic load they were never meant to see. The other failure is at the bolt holes, which elongate if the plate has ever been run loose, and once they are oval the plate will not stay tight no matter how hard it is torqued.

Check the flange whenever you have the holder plate off. Spin it and watch for wobble, look at the bolt holes for elongation, and check the mating face is clean and flat. If you have replaced a holder plate and the new one still runs out, the flange is the next thing to look at.

Call 763-535-0770 if you want help diagnosing deck vibration before ordering parts.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado BD 28/20 — 99728
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U

This part is shared across 9 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base transmission drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the brush plate mounting flange do?

It bolts to the transmission output shaft and carries the brush holder plate, transferring all of the brush’s torque and side loads into the gearbox.

My deck vibrates and the brush wears in a ring. What should I check?

A bent mounting flange makes the brush run out of true, which produces exactly that pattern. Spin the flange and watch for wobble, and check the bolt holes have not elongated.

What models is the brush plate mounting flange (part# 21002010) compatible with?

Tornado lists it on 10 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order the brush plate mounting flange (part# 21002010) or get help?

You can add the brush plate mounting flange (part# 21002010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the brush plate mounting flange (part# 21002010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the brush plate mounting flange do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It bolts to the transmission output shaft and carries the brush holder plate, transferring all of the brush’s torque and side loads into the gearbox.”}},{“@type”:”Question”,”name”:”My deck vibrates and the brush wears in a ring. What should I check?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A bent mounting flange makes the brush run out of true, which produces exactly that pattern. Spin the flange and watch for wobble, and check the bolt holes have not elongated.”}},{“@type”:”Question”,”name”:”What models is the brush plate mounting flange (part# 21002010) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Tornado lists it on 10 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.”}},{“@type”:”Question”,”name”:”How do I order the brush plate mounting flange (part# 21002010) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the brush plate mounting flange (part# 21002010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Brush Plate Mounting Flange 21002010”

Your email address will not be published. Required fields are marked *