Brush Retaining Spring 47230100

$6.99

Genuine OEM brush retaining spring (part# 47230100) for Tornado floor scrubbers. It is the sprung catch on the brush hub that holds the brush or pad driver on and lets it be changed without tools.

Genuine OEM brush retaining spring (part# 47230100) for Tornado floor scrubbers — compatible machines are listed below. It is the sprung catch on the brush hub: the part that lets a brush or pad driver click on and stay on, and that releases it again when the brush is twisted off.

It is one of the parts an operator interacts with most and thinks about least. Every brush change works it, every brush that gets caught on a dock plate or a pallet corner shock-loads it, and it does all of that sitting in solution spray with grit washing past.

Failure is usually loss of tension rather than breakage. The spring takes a set, stops pressing hard enough, and the brush begins to come loose in service — it rattles in the hub, the machine gets noisy, and sooner or later a brush drops off mid-run. That is more than an inconvenience: a brush that is loose in the hub hammers the drive lugs, and replacing those is a far bigger job than replacing a spring. The other direction is a spring packed with dried solution and grit so it no longer moves freely, which makes brushes hard to fit and hard to release.

Check it at every brush change, which costs nothing: fit the brush and try to move it by hand. It should be positively held with no rattle. Look for corrosion pitting on the coils or the arm, which is where fatigue cracks start, and clean the pocket the spring works in rather than forcing a stiff one.

This is the genuine Tornado spring at the correct rate and dimensions, so brushes hold the way the hub was designed around.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U

This part is shared across 21 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base transmission drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the brush retaining spring (part# 47230100) do?

It is the sprung catch on the brush hub that holds the brush or pad driver in place and releases it when the brush is twisted off, so brushes can be changed without tools.

My brush keeps working loose or has come off mid-run. Is this the part?

Usually. These springs fail by losing tension rather than breaking, so the brush starts to rattle in the hub and eventually drops off. Fix it promptly — a loose brush hammers the drive lugs, and replacing those is a much bigger job.

Brushes are hard to fit and hard to release. What should I check?

The spring and the pocket it works in. Dried solution and grit pack the pocket so the spring cannot move freely. Clean it rather than forcing a stiff spring, and check the coils and arm for corrosion pitting, which is where fatigue cracks start.

How do I order the Brush Retaining Spring (part# 47230100) or get help?

You can add the Brush Retaining Spring (part# 47230100) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the brush retaining spring (part# 47230100) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the brush retaining spring (part# 47230100) do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is the sprung catch on the brush hub that holds the brush or pad driver in place and releases it when the brush is twisted off, so brushes can be changed without tools.”}},{“@type”:”Question”,”name”:”My brush keeps working loose or has come off mid-run. Is this the part?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Usually. These springs fail by losing tension rather than breaking, so the brush starts to rattle in the hub and eventually drops off. Fix it promptly — a loose brush hammers the drive lugs, and replacing those is a much bigger job.”}},{“@type”:”Question”,”name”:”Brushes are hard to fit and hard to release. What should I check?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The spring and the pocket it works in. Dried solution and grit pack the pocket so the spring cannot move freely. Clean it rather than forcing a stiff spring, and check the coils and arm for corrosion pitting, which is where fatigue cracks start.”}},{“@type”:”Question”,”name”:”How do I order the Brush Retaining Spring (part# 47230100) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the Brush Retaining Spring (part# 47230100) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Brush Retaining Spring 47230100”

Your email address will not be published. Required fields are marked *