Brush Transmission Flexible Coupling 20302050
$36.99
Genuine Tornado flexible coupling (part# 20302050) — fits 15 Tornado scrubber models including the BDSO 27/28. Connects the brush motor to the transmission and absorbs shock loads.
Genuine Tornado flexible coupling, part number 20302050, used on 15 Tornado scrubber models including the BDSO 27/28. The coupling sits between the brush motor output and the brush transmission. Its job is to transmit torque while absorbing the shock that happens every time a brush bites, catches an edge or starts against a loaded deck — shock that would otherwise go straight into the motor shaft and the gear train.
It is designed to be the weak link, and that is a good thing: a coupling is far cheaper than either of the parts it protects. The failure mode is distinctive. The elastic element wears or cracks and the drive develops backlash, which you hear as a knock at every start and stop and feel as a brush that takes a moment to pick up speed. Left to go further, the element tears out completely and the motor spins with no brush rotation at all.
Replace a coupling at the knocking stage rather than the no-drive stage. By the time it has torn through, the slack has usually been hammering the transmission bearings for weeks. Check the alignment of the motor and transmission when you fit the new one — a coupling that keeps failing early is almost always telling you something is out of line or a mount has cracked.
Call 763-535-0770 if you are hearing a knock and want help deciding whether it is the coupling, the transmission or a motor bearing.
Compatible Models
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado TS530-W26-U
- Tornado TS530-W30-U
This part is shared across 14 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the brush base transmission drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the flexible coupling do?
It connects the brush motor to the brush transmission, transmitting torque while absorbing the shock loads that occur when a brush bites or starts under load.
I hear a knock when the brushes start and stop. Is that the coupling?
Usually, yes. A worn or cracked coupling element creates backlash in the drive, which shows up as a knock at each change of load before the coupling eventually tears through.
What models is the flexible coupling (part# 20302050) compatible with?
Tornado lists it on 15 machines, including the BDSO 27/28 stand-on scrubber. The full list is above; call us if your machine is not on it.
How do I order the flexible coupling (part# 20302050) or get help?
You can add the flexible coupling (part# 20302050) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the brush transmission flexible coupling (part# 20302050) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet