Bumper Wheel 46541010
$9.99
Genuine OEM grey bumper wheel (part# 46541010) for Tornado floor scrubbers. It is the roller on the edge of the scrub head that lets the machine run along a wall without marking it.
Genuine OEM bumper wheel (part# 46541010) for Tornado floor scrubbers — compatible machines are listed below. It is the grey roller mounted at the edge of the scrub head, and the machine uses more than one.
Its job is to be the only thing that touches a wall. On a scrubber the brush head is the widest, most exposed part of the machine and the part an operator deliberately runs close to edges, because that is where the dirt collects. The bumper wheel takes that contact as a rolling touch rather than a scrape, which protects two things at once: the customer’s wall, baseboard and rack leg, and the deck’s own edge and splash guard mountings.
The grey compound is not incidental. It is chosen to be non-marking, so contact with a painted wall or a white baseboard leaves nothing behind. A black substitute wheel does mark, and in a retail or healthcare setting that shows up as a long grey line at scrub-head height down an entire aisle.
Wheels fail by wearing flat on one side when their bushing seizes and the wheel stops rolling, by splitting at the hub, and by going hard and losing their give. A wheel that no longer turns is worse than no wheel — it is a skid, and it both marks walls and transmits every knock straight into the deck edge.
Check them whenever the brushes are changed: each should spin freely by hand and be round. Replace a wheel that is flatted, split, seized, or has lost its surface, and check the bushing it runs on at the same time.
Compatible Models
- Tornado 30″ FK3000 Floorkeeper Automatic – Series C — 99430
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 27 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the bumper wheel (part# 46541010) do?
It is the roller at the edge of the scrub head that takes contact with walls, baseboards and rack legs as a rolling touch rather than a scrape — protecting both the building and the deck edge and splash guard mountings.
Does the colour matter?
Yes. The grey compound is specified to be non-marking. A black substitute leaves a long grey line at scrub-head height down a wall, which is a problem in retail and healthcare settings.
How do I know a bumper wheel needs replacing?
Spin each one by hand at every brush change — it should turn freely and be round. Replace it if it is flatted on one side, split at the hub, seized, or has gone hard. A seized wheel is worse than none: it skids, marks walls and transmits every knock into the deck.
How do I order the Bumper Wheel (part# 46541010) or get help?
You can add the Bumper Wheel (part# 46541010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bumper wheel (part# 46541010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet