Bushing 47101040

$8.99

Genuine OEM bushing (part# 47101040) for Tornado floor scrubbers. It is the sleeve the bumper wheels turn on at the edge of the scrub head.

Genuine OEM bushing (part# 47101040) for Tornado floor scrubbers — the machine list is below. On the brush base it is the sleeve that a bumper wheel runs on, fitted at more than one position on the head.

It is the part that decides whether a bumper wheel rolls or skids, and that distinction matters more than the price suggests. A wheel turning on a sound bushing absorbs contact with a wall as a roll. A wheel whose bushing has seized or worn into an oval does not turn at all: it becomes a skid block that marks walls, wears flat on one side within days, and passes every knock straight into the deck edge and the splash guard mountings.

This bushing lives in the worst conditions on the machine — right at floor level, at the leading edge of the head, in solution, grit and whatever the brushes throw forward. Grit working into a loaded bearing surface is what finishes it, and that happens on a timescale set by how dirty the floors are rather than by hours on the meter.

Check it with the wheel off. A good bushing is round, a snug sliding fit on its pin, and free-turning; a worn one is oval, thin on the loaded side, scored, or has started to spin in its housing instead of the pin turning inside it. Replace the bushing and the wheel together — fitting a new wheel on a worn bushing simply ruins the new wheel, and fitting a new bushing under a flatted wheel leaves the skid in place.

This is the genuine Tornado bushing in the correct bore, outside diameter and length.

Compatible Models

  • Tornado 30″ FK3000 Floorkeeper Automatic – Series C — 99430
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 27 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the bushing (part# 47101040) do?

It is the sleeve a bumper wheel turns on at the edge of the scrub head. It is what decides whether the wheel rolls against a wall or skids.

My bumper wheel is worn flat on one side. What caused it?

A seized or worn bushing. Once the wheel stops turning it becomes a skid block — it flats within days, marks walls, and passes every knock into the deck edge and splash guard mountings.

Should I replace the bushing and wheel together?

Yes. A new wheel on a worn bushing is quickly ruined, and a new bushing under a flatted wheel leaves the skid in place. Check the pin for scoring while you are there.

How do I order the Bushing (part# 47101040) or get help?

You can add the Bushing (part# 47101040) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bushing (part# 47101040) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Bushing 47101040”

Your email address will not be published. Required fields are marked *