Bushing 47103010

$15.99

Genuine OEM bushing (part# 47103010) for Tornado floor scrubbers. It is the bushing that sits above the brush drive flange on the transmission shaft stack.

Genuine OEM bushing (part# 47103010) for Tornado floor scrubbers — compatible machines are listed below. On the brush base transmission it is the bushing fitted at the top of the brush drive stack, above the flange that carries the hub. Note that the same assembly uses a second, different bushing below the flange under its own part number, so order by number rather than by appearance.

The bushing is the bearing surface between a rotating part and the structure holding it. It is deliberately the softest thing in the joint, so it wears instead of the shaft and the flange — parts that cost many times more and take far longer to change. Keeping a bushing fresh is therefore the cheapest maintenance on the whole transmission.

Wear here shows up at the brush. A worn bushing lets the drive stack move off its axis, so the brush or pad runs with a wobble; you see it as uneven wear across the brush face, hear it as a rhythmic knock that rises with brush speed, and feel it as vibration through the machine. Left long enough the movement starts working on the shaft and the flange bore, which is the point at which a cheap repair turns into an expensive one.

Check it whenever the hub is apart. An unworn bushing is round and a snug fit; a worn one is oval, thin on one side, scored, or has started to spin in its housing. Replace the bushings in the stack together, inspect the shaft for scoring while you have access, and follow the service lubrication instruction rather than fitting it dry.

This is the genuine Tornado bushing in the correct bore, outside diameter and length.

Compatible Models

  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BD 33/30 — 99780
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U

This part is shared across 13 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base transmission drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Where does the bushing (part# 47103010) sit?

At the top of the brush drive stack on the brush base transmission, above the flange that carries the hub. The same assembly uses a different bushing below the flange, so order by part number rather than by looks.

What happens when this bushing wears out?

The drive stack moves off its axis, so the brush or pad runs with a wobble. You see it as uneven wear across the brush face, hear it as a knock that rises with brush speed, and feel it as vibration. Left too long it starts wearing the shaft and the flange bore.

How do I check the bushing (part# 47103010)?

With the hub apart: an unworn bushing is round and a snug fit, a worn one is oval, thin on one side, scored, or has begun to spin in its housing. Inspect the shaft for scoring at the same time and replace the stack’s bushings together.

How do I order the Bushing (part# 47103010) or get help?

You can add the Bushing (part# 47103010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bushing (part# 47103010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Bushing 47103010”

Your email address will not be published. Required fields are marked *