Bushing 47103020

$12.99

Genuine OEM bushing (part# 47103020) for Tornado floor scrubbers. It is the bushing fitted below the brush drive flange, beneath the washer and retaining screw.

Genuine OEM bushing (part# 47103020) for Tornado floor scrubbers — the machine list is below. On the brush base transmission it is the bushing fitted under the brush drive flange, in the stack that runs down to the retaining washer and screw. A second, different bushing sits above the flange under its own part number, so order by number: the two are not interchangeable even though they look similar in the parts diagram.

Like every bushing on the machine it is a sacrificial bearing surface, chosen to be softer than the shaft and the housing so that it takes the wear instead of them. That is a deliberate economy: this part is inexpensive and quick to change, while a worn shaft or an ovalled housing bore is neither.

Wear tells on the brush first. Slop in the drive stack lets the hub run slightly off-axis, which puts a wobble into the brush, wears the brush face unevenly, and sets up a knock or vibration that rises and falls with brush speed. On a scrubber there is a second cause worth knowing about: solution and soil get into the joint, and grit in a loaded bearing surface wears a bushing far faster than running hours alone would suggest, so a machine on dirty floors needs this checked more often than one on finished retail floors.

Inspect it with the hub apart. Look for ovality, a thin side, deep scoring, or a bushing that has started turning in its housing instead of the shaft turning in the bushing. Replace both bushings in the stack together and check the shaft for scoring while you have access.

This is the genuine Tornado bushing in the correct bore, outside diameter and length.

Compatible Models

  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BD 26/27 — 99770
  • Tornado BD 33/30 — 99780
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado 99680blt — TS120-S53-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U

This part is shared across 13 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base transmission drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Where does the bushing (part# 47103020) sit?

Below the brush drive flange on the brush base transmission, in the stack running down to the retaining washer and screw. A different bushing sits above the flange — they look similar but are not interchangeable, so order by part number.

Why does this bushing wear faster on some machines?

Because of what gets into it. Solution and soil reach the joint, and grit in a loaded bearing surface wears a bushing much faster than running hours alone would suggest. A machine working dirty floors needs this checked more often than one on finished retail floors.

What does a worn one feel like from the operator’s seat?

Vibration and a knock that rises and falls with brush speed, plus uneven wear across the brush face, because slop in the stack lets the hub run slightly off-axis.

How do I order the Bushing (part# 47103020) or get help?

You can add the Bushing (part# 47103020) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bushing (part# 47103020) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Bushing 47103020”

Your email address will not be published. Required fields are marked *