Bushing 47103080

$7.99

Genuine OEM pivot bushing (part# 47103080) for Tornado stand-on and walk-behind floor scrubbers. It is the bearing sleeve at a bolted pivot in the squeegee lift linkage, fitted between the arm and its through-bolt so the joint swings on a renewable surface instead of wearing the arm itself.

Genuine OEM pivot bushing (part# 47103080), used across a wide range of Tornado stand-on and walk-behind floor scrubbers — see the full compatibility list below. On the squeegee control assembly it sits at a through-bolted pivot, sleeved between the linkage arm and the bolt that passes through it, with a washer and lock nut drawing the stack together.

The job of a bushing like this is to be the part that wears. The squeegee linkage swings every time the squeegee is raised or lowered, and it swings again every time the squeegee breaks away from an obstacle. If the arm turned directly on the bolt, that movement would oval the hole in the arm and chew the bolt, and the fix would be a new arm. The bushing takes that wear instead and costs a fraction of the parts it protects.

Signs this bushing is finished: the squeegee rattles or clunks audibly as the machine crosses a joint or a threshold, there is visible side-to-side play in the linkage when you rock the squeegee by hand with the machine parked, the squeegee sits slightly crooked so one side of the blade wipes harder than the other, or the lift action feels notchy instead of smooth. Water left in a narrow stripe on one side of the lane is a classic late symptom.

Fitting is straightforward but worth doing properly. Take the bolt out, clean the bore, and check the arm for an ovalled hole before pressing the new bushing in — a worn bushing that was left too long usually means the arm has started to wear too, and a fresh bushing in a damaged arm will be loose again quickly. Renew the lock nut if its nylon insert has lost its grip, and do not overtighten; the joint has to swing freely.

Because these pivots work in pairs and under the same load, it is normal practice to change the matching bushing on the other side at the same time so the linkage stays square.

Compatible Models

  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 16 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the bushing (part# 47103080) do on a Tornado floor scrubber?

It is the renewable bearing sleeve at a bolted pivot in the squeegee lift linkage. The arm swings on the bushing rather than directly on the bolt, so the bushing absorbs the wear instead of the arm and the bolt.

How do I know if the bushing (part# 47103080) needs replacing?

Park the machine and rock the squeegee by hand. Side-to-side play in the linkage, a clunk or rattle as the machine crosses a threshold, a squeegee that sits crooked so one side of the blade wipes harder, or a notchy lift action all point at a worn pivot bushing.

Should I replace both sides at once?

Usually yes. These pivots work in pairs under the same load, so if one is worn the other is close behind. Changing both keeps the linkage square and keeps the squeegee blade meeting the floor evenly across its width.

How do I order the Bushing (part# 47103080) or get help?

You can add the Bushing (part# 47103080) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bushing (part# 47103080) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Bushing 47103080”

Your email address will not be published. Required fields are marked *