Find genuine Tornado BDSO 27/28 replacement parts for Models 99786 and 99786C. Can’t find your part? Call us at 763-535-0770.
Find the item number on the drawing, then match it to the same number in the table below that drawing. Each table lists the part description and Tornado’s part number for every numbered item on that sheet.
Squeegee Control — Up to S/N 18005628
This drawing covers machines up to serial number 18005628.
1. Lock Nut INOX – 6022080410. Washer – 2080507010. Washer – 2080507011. Spring – 4723012012. Bushing – 4710803013. Screw M6 x 50 INOX – 6011063014. Screw M8 x 50 – 6011081915. Lock Washer INOX – 6050800616. Nut – 6021080917. Screw M8 x 50 INOX – 6011082518. Bushing – 4710308019. Washer INOX – 603080072. Washer INOX – 6030800720. Lock Nut – 6022080321. Clip – 6080000322. Washer – 6030800323. Bushing – 4710309023. Bushing – 4710309024. Joint Arm – 2150506025. Screw M6 x 80 INOX – 6011063126. Bushing – 4710603027. Spring – 4722024028. Nut INOX – 6021060629. Lock Nut INOX – 602206023. Arm Joint Plate – 2150505030. Arm – 2150503031. Screw M6 x 50 – 6013061532. Washer – 6030600832. Washer – 6030600833. Squeegee Actuator Motor – 4632004034. Nut INOX – 6021081234. Nut INOX – 6021081235. Lock Nut INOX – 6022060236. Screw M12 x 60 INOX – 6011121237. Lock Nut INOX – 6022120238. Squeegee Arm – 2150502039. Lock Nut INOX – 602212024. Support Arm Joint – 2150504040. Washer – 6031300341. Adjuster – 2060514042. Spring – 4721003043. Washer – 6031000443. Washer – 6031000443. Washer – 6031000444. Lock Nut – 6022100245. Nut INOX – 6021100246. Threaded Bar – 6240600647. Handwheel – 6171000348. Squeegee Support – 2150501049. Nut INOX – 602112035. Washer INOX – 6030800750. Handwheel – 6171200550. Handwheel – 6171200551. Conical Washer – 6051200652. Squeegee Castor Assembly – 4653106053. Bushing – 4710308054. Washer – 6050800555. Screw M8 x 20 – 601108066. Screw M8 x 30 INOX – 601108107. Screw M8 x 50 – 601108198. Lock Washer INOX – 605080069. Lock Nut – 60220604The squeegee control assembly raises and lowers the squeegee and sets the pressure it holds against the floor. On the BDSO 27/28 that means the actuator or linkage, the pivots and pins it runs on, the springs that set the down-pressure, and the vacuum hose routing that has to follow the squeegee through its travel. When a squeegee will not lift, or drops hard, or holds uneven pressure across the path, the fault is here rather than in the squeegee itself. Tornado publishes four versions of this drawing, each with 55 callouts, so match your serial number carefully.
Squeegee Control — S/N 18005629–20001884
This drawing covers machines with serial numbers 18005629 through 20001884.
1. Lock Nut INOX – 6022080410. Washer – 2080507010. Washer – 2080507011. Spring – 4723012012. Bushing – 4710803013. Screw M6 x 50 INOX – 6011063014. Screw M8 x 50 – 6011081915. Lock Washer INOX – 6050800616. Nut – 6021080917. Screw M8 x 50 INOX – 6011082518. Bushing – 4710308019. Washer INOX – 603080072. Washer INOX – 6030800720. Lock Nut – 6022080321. Clip – 6080000322. Washer – 6030800323. Bushing – 4710309023. Bushing – 4710309024. Joint Arm – 2150506025. Screw M6 x 80 INOX – 6011063126. Bushing – 4710603027. Spring – 4722024028. Nut INOX – 6021060629. Lock Nut INOX – 602206023. Arm Joint Plate – 2150505030. Arm – 2150503031. Pin – 2080510032. Washer – 6030600832. Washer – 6030600833. Squeegee Actuator Motor – 4632004034. Nut INOX – 6021081234. Nut INOX – 6021081235. Spring Clip – 6212060435. Spring Clip – 6212060436. Screw M12 x 60 INOX – 6011121237. Lock Nut INOX – 6022120238. Squeegee Arm – 2150502039. Lock Nut INOX – 602212024. Support Arm Joint – 2150504040. Washer – 6031300341. Adjuster – 2060514042. Spring – 4721003043. Washer – 6031000443. Washer – 6031000443. Washer – 6031000444. Lock Nut – 6022100245. Nut INOX – 6021100246. Threaded Bar – 6240600647. Handwheel – 6171000348. Squeegee Support – 2150501049. Nut INOX – 602112035. Washer INOX – 6030800750. Handwheel – 6171200550. Handwheel – 6171200551. Conical Washer – 6051200652. Squeegee Castor Assembly – 4653106053. Bushing – 4710308054. Washer – 6050800555. Screw M8 x 20 – 601108066. Screw M8 x 30 INOX – 601108107. Screw M8 x 50 – 601108198. Lock Washer INOX – 605080069. Lock Nut – 60220604Squeegee Control — From S/N 20001885
This drawing covers machines from serial number 20001885 forward.
1. Lock Nut INOX – 6022080410. Washer – 2080507010. Washer – 2080507011. Spring – 4723012012. Bushing – 4710803013. Screw M6 x 50 INOX – 6011063014. Screw M8 x 50 – 6011081915. Lock Washer INOX – 6050800616. Nut – 6021080917. Screw M8 x 50 INOX – 6011082518. Bushing – 4710308019. Washer INOX – 603080072. Washer INOX – 6030800720. Lock Nut – 6022080321. Clip – 6080000322. Washer – 6030800323. Bushing – 4710309023. Bushing – 4710309024. Joint Arm – 2150506025. Screw M6 x 80 INOX – 6011063126. Bushing – 4710603027. Spring – 4722024028. Nut INOX – 6021060629. Lock Nut INOX – 602206023. Arm Joint Plate – 2150505030. Arm – 2150503031. Pin – 2080510032. Washer – 6030600832. Washer – 6030600833. Squeegee Actuator Motor – 4632004034. Nut INOX – 6021081234. Nut INOX – 6021081235. Spring Clip – 6212060435. Spring Clip – 6212060436. Screw M12 x 60 INOX – 6011121237. Lock Nut INOX – 6022120238. Squeegee Arm – 2150502039. Lock Nut INOX – 602212024. Support Arm Joint – 2150504040. Washer – 6031300341. Adjuster – 2060514042. Spring – 4721003043. Washer – 6031000443. Washer – 6031000443. Washer – 6031000444. Lock Nut – 6022100245. Nut INOX – 6021100246. Threaded Bar – 6240600647. Handwheel – 6171000348. Squeegee Support – 2150501049. Screw M12 x 65 INOX – 6018120149. Screw M12 x 65 INOX – 601812015. Washer INOX – 6030800750. Handwheel – 6171200550. Handwheel – 6171200551. Conical Washer – 6051200652. Castor Wheel – 4653107053. Bushing – 4710308054. Washer – 6050800555. Screw M8 x 20 – 601108066. Screw M8 x 30 INOX – 601108107. Screw M8 x 50 – 601108198. Lock Washer INOX – 605080069. Lock Nut – 60220604Squeegee Control — From S/N 24001868
This drawing covers machines from serial number 24001868 forward.
21. Clip – 6080000325. Screw M6 x 80 INOX – 601106318. Lock Nut – 6022080322. Washer – 6030800323. Bushing – 4710309023. Bushing – 471030902. Washer INOX – 603080079. Lock Nut – 6022060424. Joint Arm – 2150506017. Screw M8 x 50 INOX – 6011082530. Arm – 2150503026. Bushing – 471060303. Arm Joint Plate – 2150505016. Nut – 6021080915. Lock Washer INOX – 605080067. SPRING PIN – 2080536018. Bushing – 4710308019. Washer INOX – 6030800710. Washer – 2080507010. Washer – 2080507020. Lock Nut – 6022080314. Screw M8 x 50 – 6011081927. Spring – 4722024050. Handwheel – 6171200550. Handwheel – 6171200528. Nut INOX – 6021060612. Bushing – 4710803034. Nut INOX – 6021081234. Nut INOX – 6021081229. Lock Nut INOX – 6022060247. Handwheel – 6171000351. Conical Washer – 6051200646. Threaded Bar – 6240600633. Squeegee Actuator Motor – 4632004032. Washer – 6030600832. Washer – 6030600835. Spring Clip – 6212060435. Spring Clip – 6212060445. Nut INOX – 6021100213. Screw M6 x 50 INOX – 6011063043. Washer – 6031000443. Washer – 6031000443. Washer – 603100044. Support Arm Joint – 2150504048. Squeegee Support – 2150501044. Lock Nut – 6022100242. Spring – 4721003053. Bushing – 4710308039. Lock Nut INOX – 6022120254. Washer – 605080055. Washer INOX – 6030800740. Washer – 6031300355. Screw M8 x 20 – 6011080631. Pin – 2080510041. Adjuster – 206051406. Screw M8 x 30 INOX – 6011081052. Castor Wheel – 4653107036. Screw M12 x 60 INOX – 6011121249. Screw M12 x 65 INOX – 6018120138. Squeegee Arm – 2150502037. Lock Nut INOX – 602212021. Lock Nut INOX – 6022080411. Spring – 47230120| # | Image | Part Description | Part Number | Price |
|---|---|---|---|---|
| 1 | ![]() | Lock Nut INOX | 60220804 | $1.99 |
| 2 | ![]() | Washer INOX | 60308007 | $1.99 |
| 3 | Arm Joint Plate | 21505050 | Call 763-535-0770 | |
| 4 | Support Arm Joint | 21505040 | Call 763-535-0770 | |
| 5 | ![]() | Washer INOX | 60308007 | $1.99 |
| 6 | ![]() | Screw M8 x 30 INOX | 60110810 | $1.99 |
| 7 | SPRING PIN | 20805360 | Call 763-535-0770 | |
| 8 | ![]() | Lock Nut | 60220803 | $1.99 |
| 9 | ![]() | Lock Nut | 60220604 | $1.99 |
| 10 | Washer | 20805070 | Call 763-535-0770 | |
| 11 | ![]() | Spring | 47230120 | $34.99 |
| 12 | Bushing | 47108030 | Call 763-535-0770 | |
| 13 | ![]() | Screw M6 x 50 INOX | 60110630 | $1.99 |
| 14 | Screw M8 x 50 | 60110819 | Call 763-535-0770 | |
| 15 | ![]() | Lock Washer INOX | 60508006 | $1.99 |
| 16 | ![]() | Nut | 60210809 | $1.99 |
| 17 | Screw M8 x 50 INOX | 60110825 | Call 763-535-0770 | |
| 18 | ![]() | Bushing | 47103080 | $7.99 |
| 19 | ![]() | Washer INOX | 60308007 | $1.99 |
| 20 | ![]() | Lock Nut | 60220803 | $1.99 |
| 21 | ![]() | Clip | 60800003 | $1.99 |
| 22 | ![]() | Washer | 60308003 | $1.99 |
| 23 | ![]() | Bushing | 47103090 | $20.99 |
| 24 | ![]() | Joint Arm | 21505060 | $210.99 |
| 25 | Screw M6 x 80 INOX | 60110631 | Call 763-535-0770 | |
| 26 | ![]() | Bushing | 47106030 | $14.99 |
| 27 | Spring | 47220240 | Call 763-535-0770 | |
| 28 | ![]() | Nut INOX | 60210606 | $1.99 |
| 29 | ![]() | Lock Nut INOX | 60220602 | $1.99 |
| 30 | Arm | 21505030 | Call 763-535-0770 | |
| 31 | Pin | 20805100 | Call 763-535-0770 | |
| 32 | ![]() | Washer | 60306008 | $1.99 |
| 33 | ![]() | Squeegee Actuator Motor | 46320040 | $706.99 |
| 34 | Nut INOX | 60210812 | Call 763-535-0770 | |
| 35 | ![]() | Spring Clip | 62120604 | $1.99 |
| 36 | Screw M12 x 60 INOX | 60111212 | Call 763-535-0770 | |
| 37 | ![]() | Lock Nut INOX | 60221202 | $1.99 |
| 38 | Squeegee Arm | 21505020 | Call 763-535-0770 | |
| 39 | ![]() | Lock Nut INOX | 60221202 | $1.99 |
| 40 | ![]() | Washer | 60313003 | $1.99 |
| 41 | ![]() | Adjuster | 20605140 | $49.99 |
| 42 | ![]() | Spring | 47210030 | $3.99 |
| 43 | ![]() | Washer | 60310004 | $1.99 |
| 44 | ![]() | Lock Nut | 60221002 | $1.99 |
| 45 | ![]() | Nut INOX | 60211002 | $1.99 |
| 46 | ![]() | Threaded Bar | 62406006 | $11.99 |
| 47 | ![]() | Handwheel | 61710003 | $9.99 |
| 48 | Squeegee Support | 21505010 | Call 763-535-0770 | |
| 49 | Screw M12 x 65 INOX | 60181201 | Call 763-535-0770 | |
| 50 | Handwheel | 61712005 | Call 763-535-0770 | |
| 51 | Conical Washer | 60512006 | Call 763-535-0770 | |
| 52 | ![]() | Castor Wheel | 46531070 | $83.99 |
| 53 | ![]() | Bushing | 47103080 | $7.99 |
| 54 | Washer | 60508005 | Call 763-535-0770 | |
| 55 | ![]() | Screw M8 x 20 | 60110806 | $1.99 |
Frequently Asked Questions About the Tornado BDSO 27/28 Squeegee Control
My squeegee will not lift. Where do I start?
With the linkage and pivots on this drawing. If the actuator runs and nothing moves, a pin or linkage has failed. If nothing runs, move to the control panel and wiring pages to check the switch and circuit.
Why does my squeegee hold more pressure on one side?
Normally a worn pivot or a tired spring on this drawing letting the frame sit out of level. It shows up as a streak on the light-pressure side and faster blade wear on the heavy side.
There are four revisions of this drawing. How do I pick the right one?
Match the serial number on your data plate to the range printed above each drawing: up to S/N 18005628, S/N 18005629 to 20001884, from S/N 20001885, and from S/N 24001868. They each carry the same number of callouts but not the same parts.
Not sure which squeegee control part your machine takes? Call 763-535-0770 with the serial number from the data plate, or stop in at 5415 West Broadway, Crystal, MN 55428 — we have sold and serviced commercial floor equipment since 1956. You can also go back to all Tornado BDSO 27/28 parts diagrams or browse the Tornado BDSO 27/28 parts category.


































