Threaded Bar 62406006
$11.99
Genuine OEM threaded bar (part# 62406006) for Tornado floor scrubbers. It is the adjuster screw in the squeegee tilt mechanism, the bar the handwheel runs on to set squeegee blade angle.
Genuine OEM threaded bar (part# 62406006) for Tornado floor scrubbers — the machines it fits are listed below. On the squeegee control assembly it is the adjuster screw itself: the handwheel runs along it, nuts and washers lock the setting, and the whole squeegee tilt adjustment works through it.
Everything about this part is about holding a setting under vibration. A scrubber squeegee is dragged across a wet floor behind a brush deck that is throwing water and vibration at it continuously, and the blade angle has to survive that for a full shift. The bar carries that load in its threads, which is why a worn or bent bar produces a squeegee that quietly drifts out of adjustment no matter how carefully it was set.
Inspect the bar whenever the squeegee will not hold its angle. Signs it needs replacing: visible bending along its length, threads that are flattened, galled or stripped over part of the travel, rust pitting deep enough to catch a fingernail, or a handwheel that turns smoothly over part of the range and then binds. If a handwheel has already stripped on this bar, replace the bar too — fitting a new knob to a damaged bar simply strips the new knob.
When fitting, clean the mounting points and check the washers and lock nuts that bear on the bar. Cupped washers and lock nuts with tired nylon inserts let the stack move and that movement is what wears the thread in the first place, so renewing them alongside the bar is sensible. Set the blade angle afterwards and verify on a wet test lane rather than by eye.
This is the genuine Tornado part, so the length, thread pitch and shoulder positions match the original exactly and the adjuster keeps its full designed range of travel.
Compatible Models
- Tornado BD 26/26 — 99726
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
This part is shared across 12 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the threaded bar (part# 62406006) do on a Tornado floor scrubber?
It is the adjuster screw in the squeegee tilt mechanism. The handwheel runs along it and nuts lock against it, so it is what physically holds the squeegee blade angle in place against the vibration coming off the brush deck.
How do I know if the threaded bar (part# 62406006) needs replacing?
Check it whenever the squeegee will not hold its angle. Look for bending along its length, threads that are flattened or stripped over part of the travel, deep rust pitting, or a handwheel that turns smoothly for part of the range and then binds.
Do I need to replace the handwheel at the same time?
If the handwheel has already stripped on this bar, yes. A stripped knob is usually a symptom of a damaged bar, and a fresh knob on a bad bar strips again quickly. It is also worth renewing the washers and lock nuts that bear on the bar.
How do I order the Threaded Bar (part# 62406006) or get help?
You can add the Threaded Bar (part# 62406006) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the threaded bar (part# 62406006) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet