Lock Nut M6 60220604
$1.99
Genuine Tornado M6 lock nut (part# 60220604) — fits 27 Tornado scrubber models including the BDSO 27/28. Nylon-insert nut that resists loosening under vibration.
Genuine Tornado M6 lock nut, part number 60220604, used on 27 Tornado scrubber models including the BDSO 27/28. It is a prevailing-torque nut — the insert grips the bolt thread so the joint resists the vibration that would walk a plain nut loose over a few hundred hours of floor work.
The rule that gets broken most often is re-use. A lock nut’s insert is deformed by the thread the first time it is run on, and every removal takes more of that grip away. A nut that spins on with your fingers has no prevailing torque left and is a plain nut pretending otherwise; it will stay put on the bench and work loose in service. Fit a new one each time the joint is opened.
The second rule is that a lock nut does not substitute for correct clamp load. It resists loosening, it does not hold a joint that was never tightened properly. If a joint keeps coming apart with fresh lock nuts, look for a cracked boss, a missing washer or a bolt that bottoms out before it clamps.
These are inexpensive and worth keeping on the shelf. Call 763-535-0770 if you want to confirm the thread size against your assembly.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 26 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What kind of nut is this?
An M6 prevailing-torque lock nut — the insert grips the bolt thread to resist loosening under vibration. Tornado part number 60220604.
Can I re-use a lock nut?
No. The insert is deformed the first time it is run on, and a nut that spins on with your fingers has no grip left. Fit a new one whenever the joint is opened.
What models is this lock nut (part# 60220604) compatible with?
Tornado lists it on 27 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.
How do I order this lock nut (part# 60220604) or get help?
You can add the M6 lock nut (part# 60220604) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock nut m6 (part# 60220604) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet