Nut 60210809

$1.99

Genuine OEM hex nut (part# 60210809) for Tornado floor scrubbers. On the squeegee control assembly it secures a through-bolted pivot in the lift linkage, working with a lock washer to hold the joint tight under constant vibration.

Genuine OEM hex nut (part# 60210809), fitted to a range of Tornado floor scrubbers — see the machine list below. On the squeegee control assembly it secures a through-bolted joint in the lift linkage, paired with a lock washer that keeps tension on the thread.

This is a plain nut, not a nyloc, and that is a deliberate choice at this position. Plain nuts with a separate lock washer are used where a joint has to be set to a particular clamp load and then rechecked periodically, because a plain nut gives honest feedback on a wrench — you can feel whether it is still tight. A nyloc always feels tight going on, which hides a joint that has actually lost its clamp.

The consequence is that this nut needs looking at during service rather than being assumed good. Check it whenever the squeegee linkage is inspected: put a wrench on it and feel for movement before you decide the joint is sound. If it moves, the lock washer under it has almost certainly flattened and both parts should be renewed together, not just retightened — retightening a joint with a dead lock washer buys a fortnight at most.

Replace the nut itself if the hex corners are rounded from a slipping wrench, if the thread is galled or the nut runs rough on a clean bolt, or if corrosion has pitted the bearing face. A nut whose face is no longer flat will not clamp evenly no matter how hard it is torqued, and uneven clamp at a linkage pivot shows up as a squeegee that sits very slightly off square.

This is the genuine Tornado part in the correct size and pattern, so the thread engagement and the bearing face match the design and the joint reaches its intended clamp load.

Compatible Models

  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado TS550-W28-U — 99729
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado 99694 — TS350-W20-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 13 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the nut (part# 60210809) do on a Tornado floor scrubber?

It secures a through-bolted pivot in the squeegee lift linkage, working together with a lock washer to hold the joint tight against the vibration coming off the brush deck.

Why is a plain nut used here instead of a lock nut?

Because this joint is meant to be checked and reset at service. A plain nut with a lock washer gives honest feedback on a wrench — you can feel whether it has moved. A nyloc always feels tight going on, which can hide a joint that has lost its clamp load.

The nut keeps coming loose. What should I do?

Do not just retighten it. A nut that moves means the lock washer beneath it has flattened and stopped working. Renew the nut and the lock washer together, and check the washer and bushing in the same joint while it is apart.

How do I order the Nut (part# 60210809) or get help?

You can add the Nut (part# 60210809) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the nut (part# 60210809) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Nut 60210809”

Your email address will not be published. Required fields are marked *