Squeegee Control Adjuster 20605140
$49.99
Genuine Tornado squeegee control adjuster (part# 20605140) — fits 11 Tornado scrubber models including the BDSO 27/28. Sets squeegee down-pressure and trailing angle.
Genuine Tornado squeegee control adjuster, part number 20605140, used on 11 Tornado scrubber models including the BDSO 27/28. The adjuster is the threaded component in the squeegee linkage that sets how hard the squeegee presses on the floor and, on most of these machines, the angle at which the blade meets it. It is the part a technician reaches for when a machine streaks, and the part nobody touches for years afterward.
Two things go wrong with it. The thread corrodes or packs with detergent residue so it will no longer turn, which means the squeegee cannot be adjusted at all and a worn blade cannot be compensated for. Or the adjuster works loose in service and backs off on its own, so the setting drifts between shifts and the operator reports that the machine streaks some days and not others — a complaint that is almost impossible to chase if you do not know the adjuster is moving.
Check it by setting the squeegee, running a few passes and looking again: the setting should not have moved. If the adjuster is seized, do not force it with a longer bar — that bends the linkage and turns a cheap part into an expensive one. Replace it, and keep the thread clean and lightly lubricated at service intervals.
Call 763-535-0770 if you want help setting squeegee pressure correctly once the new adjuster is in.
Compatible Models
- Tornado BD 26/26 — 99726
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
This part is shared across 10 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the squeegee control adjuster do?
It sets the squeegee’s down-pressure on the floor and, on most of these machines, the angle at which the blade meets it.
My machine streaks on some shifts but not others. Could it be the adjuster?
That is a classic sign of an adjuster backing off in service. Set the squeegee, run a few passes and check the setting again — if it has moved, the adjuster needs replacing.
What models is the squeegee control adjuster (part# 20605140) compatible with?
Tornado lists it on 11 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.
How do I order the squeegee control adjuster (part# 20605140) or get help?
You can add the squeegee control adjuster (part# 20605140) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the squeegee control adjuster (part# 20605140) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet