Screw M8 x 20 60110806

$1.99

Genuine OEM M8 x 20 mm screw (part# 60110806) for Tornado floor scrubbers. It is the short M8 fastener used where the squeegee control linkage bolts to a bracket or plate rather than through a pivot.

Genuine OEM M8 x 20 mm screw (part# 60110806), used across a wide range of Tornado floor scrubbers — the full machine list is below. On the squeegee control assembly it appears at several points, including the castor wheel mounting, and it is the short M8 fastener used where the linkage bolts to a bracket or plate rather than passing through a swinging pivot.

The short length is the whole design intent. These are clamped joints, not hinges: the parts are meant to stay still relative to each other, and the screw only needs enough thread to develop full clamp load into a tapped hole or a nut sitting right behind the plate. Fitting a longer M8 in its place can bottom the screw in a blind hole, which feels like a tight joint on the wrench while the plate is actually still loose — one of the more deceptive assembly faults there is.

Because these are clamped rather than pivoting joints, the failure mode is backing off rather than wearing out. Vibration from the brush deck and the castor works at any fastener that is not fully torqued or has lost its lock washer. Check these screws at every squeegee service: a wrench and a feel is enough. A screw that moves means the joint has been working, so inspect the hole and the plate faces for fretting marks before simply retightening.

Replace the screw if the head is rounded, if the thread is damaged or galled, or if there is any sign of stretch — a screw that has been through a joint that worked loose can be slightly necked below the head. At the castor mounting in particular, replace rather than reuse, because that is the fastener most exposed to impact loading when the machine is reversed into something.

This is the genuine Tornado part in the correct size and length, so the joints clamp properly and no screw bottoms in a blind hole.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 23 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Where is the screw (part# 60110806) used on a Tornado floor scrubber?

It is used at several clamped joints on the squeegee control assembly, including the castor wheel mounting — points where the linkage bolts to a bracket or plate rather than passing through a swinging pivot.

Can I use a longer M8 screw instead?

It is a bad idea. A longer screw can bottom in a blind hole, which feels tight on the wrench while the plate it is supposed to clamp is still loose. The 20 mm length is chosen to develop full clamp load without bottoming.

How do I know if the screw (part# 60110806) needs replacing?

Replace it if the head is rounded, the thread is damaged or galled, or the shank looks slightly necked below the head, which means it has stretched in a joint that worked loose. Replace rather than reuse at the castor mounting, since that one takes impact loading.

How do I order the Screw M8 x 20 (part# 60110806) or get help?

You can add the Screw M8 x 20 (part# 60110806) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the screw m8 x 20 (part# 60110806) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Screw M8 x 20 60110806”

Your email address will not be published. Required fields are marked *