Flat Washer M6 60306008
$1.99
Genuine Tornado M6 flat washer (part# 60306008) — fits 29 Tornado scrubber models including the BDSO 27/28. Standard load-spreading washer for M6 fasteners.
Genuine Tornado M6 flat washer, part number 60306008, used on 29 Tornado scrubber models including the BDSO 27/28. This is the standard-width M6 washer, used where a fastener clamps against metal structure and the job is simply to spread load and give the nut or screw head a clean bearing face.
It matters most where it is missing. A nut tightened directly against a painted bracket scores through the paint, and that scratch is where corrosion starts on a machine that works in water every day. A screw head bearing straight onto a slotted hole digs into the edge of the slot and the joint loses clamp as soon as the component shifts. Neither failure announces itself; both show up as a loose joint months later.
Replace washers that are dished or corroded, and keep the specified stack order. This washer and the wider 18 mm washer on the same drawing are not interchangeable — the wide one is for soft materials and this one for metal joints, and swapping them either cracks a moulding or wastes clamp area.
Call 763-535-0770 if you want help identifying which washer belongs at a particular position on the drawing.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 28 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What is this washer for?
It is the standard-width M6 flat washer, used where a fastener clamps against metal structure to spread load and give a clean bearing face.
Is it the same as the 18 mm washer on this drawing?
No. The wide 18 mm washer is for clamping against plastic, rubber or thin sheet; this one is for metal joints. Swapping them either cracks a moulding or wastes clamp area.
What models is this washer (part# 60306008) compatible with?
Tornado lists it on 29 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.
How do I order this washer (part# 60306008) or get help?
You can add the M6 flat washer (part# 60306008) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the flat washer m6 (part# 60306008) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet