Squeegee Caster 46531060
$63.99
Genuine OEM squeegee caster (part# 46531060) for Tornado scrubbers — fits the BDSO 27/28 (99786), BD 28/20 (99728), TS550-W28-U (99729), TS530-W26-U and TS530-W30-U. Sets squeegee height and trailing angle.
The squeegee caster carries the trailing end of the squeegee and sets both its height above the floor and the angle at which the blades meet it. Tornado fits the same caster to the BDSO 27/28 stand-on scrubber (99786), the BD 28/20 (99728), the TS550-W28-U (99729) and the TS530-W26-U and TS530-W30-U scrubbers. That makes it a far more important part than its size suggests: a squeegee can have perfect blades and still streak badly if the casters have worn unevenly or seized.
Casters wear in two ways. The wheel itself flattens or wears down, which lowers that corner of the squeegee and buries the blade instead of letting it flex; and the bearing or swivel seizes, so the caster scrubs sideways through turns and drags the squeegee out of square. Debris wound around the axle is the usual cause of the second one, and it is easy to miss because the caster still looks fine from above.
The test is simple. With the squeegee raised, spin each caster by hand. It should turn freely and swivel without catching. Then look across the squeegee from the side with it lowered: the blade should meet the floor at the same angle across its whole width. A caster that has worn even a few millimetres will show up as a streak that stays in the same part of the path on every pass.
Replace casters in pairs if one has worn noticeably — a new caster on one side and a worn one on the other puts the squeegee out of level and produces exactly the problem you were trying to fix. Call 763-535-0770 if you want help diagnosing a streak before you order.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado TS530-W26-U
- Tornado TS530-W30-U
See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the squeegee caster do on the Tornado BDSO 27/28?
It carries the trailing end of the squeegee and sets its height above the floor and the angle at which the blades meet it.
My squeegee streaks in the same place every pass. Could it be a caster?
Yes. A caster that has worn down or seized drops or twists that corner of the squeegee, and the streak stays in the same part of the path no matter how new the blades are.
What models is the squeegee caster (part# 46531060) compatible with?
Tornado lists it on the BDSO 27/28 (99786), the BD 28/20 (99728), the TS550-W28-U (99729), the TS530-W26-U and the TS530-W30-U.
How do I order the squeegee caster (part# 46531060) or get help?
You can add the squeegee caster (part# 46531060) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the squeegee caster (part# 46531060) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet