Bushing 47106060

$10.99

Genuine OEM bushing (part# 47106060) for Tornado floor scrubbers. It is the sleeve the squeegee bumper wheel turns on.

Genuine OEM bushing (part# 47106060) for Tornado floor scrubbers — the machines it fits are listed below. On the squeegee assembly it is the sleeve a bumper wheel rotates on.

It is the part that decides whether a bumper wheel rolls or skids, and that distinction does real work. A wheel turning on a sound bushing absorbs a wall contact as a roll, protecting both the building and the squeegee frame. A wheel whose bushing has seized or worn oval does not turn at all; it drags, flats on one side within days, marks the wall, and transmits the full impact into the squeegee body — which is how a frame gets nudged out of true, after which the machine streaks regardless of how new the rubber is.

Conditions here are about as bad as they get on the machine. The bushing sits at floor level at the back, in recovery water carrying everything the brushes have lifted off the floor. Grit in a loaded bearing surface is a grinding paste, so wear is driven by how dirty the floors are rather than by hours on the meter.

Check it with the wheel removed. A good bushing is round, a snug sliding fit on its pin, and turns freely; a worn one is oval, thin on the loaded side, scored, or has begun to spin in its housing rather than letting the pin turn inside it. Inspect the pin too, since a scored pin will chew a new bushing out quickly.

Replace the bushing and wheel together: a new wheel on a worn bushing is wasted, and a new bushing under a flatted wheel leaves the skid in place.

Compatible Models

  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 15 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the squeegee drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the bushing (part# 47106060) do?

It is the sleeve the squeegee bumper wheel turns on — the part that decides whether the wheel rolls against a wall or skids.

Why does this bushing wear quickly?

It sits at floor level at the back of the machine, in recovery water carrying everything the brushes have lifted off the floor. Grit in a loaded bearing surface acts like grinding paste, so wear tracks how dirty the floors are rather than hours on the meter.

Should I replace the wheel at the same time?

Yes. A new wheel on a worn bushing is wasted, and a new bushing under a flatted wheel leaves the skid in place. Check the pin for scoring too.

How do I order the Bushing (part# 47106060) or get help?

You can add the Bushing (part# 47106060) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the bushing (part# 47106060) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Bushing 47106060”

Your email address will not be published. Required fields are marked *