Cam Lever Assembly X1184
$23.99
Genuine OEM cam lever assembly (part# X1184) for Tornado and Powr-Flite commercial high-speed burnishers — the clamping lever that locks the handle at the operator’s chosen angle. Fits all Tornado Brute Force burnishers (see full list below).
The X1184 cam lever assembly is the hand lever that clamps and releases the handle on a Brute Force burnisher. It appears on the Brute Force 1600 (98458B) drawing, on the Brute Force 2000 (98482B), and on the current and earlier Brute Force 2000 Dust Control (98486) drawings — in each case in the group with the handle lock clamp (X1456), the handle brace (X1464) and the slotted cam washer (X8028).
The lever works as a cam: flipping it over centre draws the clamp together and locks the handle, and flipping it back releases it. Because the operator uses it at the start and end of every job, and because it is the part that gets leaned on when the machine is tilted, it sees more cycles than almost anything else on the machine that is not consumable.
Replace the X1184 when the handle will not stay put. The classic failure is a lever that still moves through its arc but no longer develops clamping force — the cam face has worn flat or the threaded stud has stretched — so the handle creeps downward during a pass and the operator ends up fighting the machine. A lever that has cracked at the pivot, that flops loose, or that requires excessive force should also be replaced; a handle that releases unexpectedly on a running burnisher is a safety problem, not an inconvenience.
When you fit a new cam lever, check the slotted cam washer (X8028) and the handle lock clamp (X1456) at the same time. Those three parts share the clamping load, and a worn washer will make a brand-new lever feel loose again within weeks. The same lever assembly is used across the whole Brute Force burnisher line, so this part carries no model name. Call 763-535-0770 with your model and serial number if you want the clamp set listed. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.
Compatible Models
- Tornado models:
- 17″ — 97590
- 20″ 1.5 HP M Series — 97595
- Brute Force 1600 — 98458B
- 17″ 1.5 HP — 98476
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- 20″ 1.5 HP — 98484
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
- Powr-Flite models:
- C131
- C131G
- C171
- C171HD
- C171HDG
- C171SD
- C172
- C201
- C201HD
- C202
- C202G
- NM1600
- NM171HD
- NM171SD
- NM2000
- NM2000DC
- NM201HD
- NM202
Frequently asked questions
What does the cam lever assembly (part# X1184) do on a Brute Force burnisher?
It is the over-centre clamping lever that locks the handle at the operator’s chosen angle and releases it for transport or storage.
How do I know if my X1184 cam lever needs replacing?
Replace it if the handle creeps or drops during use, if the lever moves through its arc without developing clamping force, if it is cracked at the pivot, or if it has become loose or very stiff.
Should I replace anything with the cam lever?
Check the slotted cam washer (X8028) and the handle lock clamp (X1456) at the same time. They share the clamping load, and a worn washer will make a new lever feel loose again quickly.
What models is the cam lever assembly (part# X1184) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the cam lever assembly (part# X1184) or get help?
You can add the cam lever assembly (part# X1184) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet