Complete Handle Assembly X8911-K

$635.99

Genuine OEM complete handle assembly (part# X8911-K) for Tornado and Powr-Flite commercial high-speed burnishers — the full handle with trigger, springs, grommet and roll pin supplied as one unit. Fits the Tornado Brute Force 1600 (98458B), 2000 (98482B) and the earlier 98486 build.

The X8911-K is the complete handle assembly for the Brute Force burnishers. It appears on the Brute Force 1600 (98458B) drawing and on both the Brute Force 2000 (98482B) drawing and the 29 December 2022 Brute Force 2000 Dust Control (98486) main assembly. On those two drawings the book breaks it into sub-callouts, which is the clearest statement of what is in it: the handle base (X8905B), the trigger handle (X8917), the roll pin (X8918), the trigger spring (X8916), a set screw (X8222) and the grommet (7BG004).

Note that the current 14 July 2025 98486 main body drawing does not include this handle group — that revision uses a two-piece handle (X1000C) instead. So if you have a late 98486 and the complete handle assembly does not appear on your drawing, you have the newer build; both 98486 drawings are published on the 98486 parts page so you can compare.

Fit the complete assembly when the handle has been bent or cracked in a fall or an impact, when more than one of the trigger components has failed, or when a high-hour machine needs the whole operator interface put back to new in a single job. Individual trigger parts are the cheaper route when exactly one of them has failed — a broken trigger spring or a worn roll pin does not justify a complete handle.

Before ordering, confirm your machine’s build: this is a significant part and the 1600, the 2000 and the two 98486 revisions do not all use the same handle arrangement. Call 763-535-0770 with your model and serial number and we will check it against the drawing with you. The assembly is shared across the three builds listed below and carries no model name. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.

Compatible Models

  • Tornado models:
  • Powr-Flite models:
    • B171
    • B172
    • B201
    • B202
    • C131
    • C131G
    • C171
    • C171HD
    • C171HDG
    • C171SD
    • C172
    • C201
    • C201HD
    • C202
    • C202G
    • NM1600
    • NM171HD
    • NM171SD
    • NM2000
    • NM2000DC
    • NM201HD
    • NM202

Frequently asked questions

What is included in the complete handle assembly (part# X8911-K)?

The drawings show it as the handle base (X8905B), trigger handle (X8917), roll pin (X8918), trigger spring (X8916), a set screw (X8222) and the grommet (7BG004).

When should I fit a complete handle assembly rather than individual parts?

Fit the assembly when the handle itself is bent or cracked, when several trigger components have failed, or when you want a high-hour machine’s operator interface renewed in one job. For a single failed spring or pin, buy that part.

My 98486 drawing does not show the X8911-K — why?

You have the current 14 July 2025 main body build, which uses a two-piece handle (X1000C) instead. The earlier 29 December 2022 build uses the X8911-K; both drawings are on the 98486 parts page.

What models is the complete handle assembly (part# X8911-K) compatible with?

The Tornado Brute Force 1600 (98458B), the Brute Force 2000 High-Speed Glazer (98482B) and the Brute Force 2000 Dust Control (98486) as built to its 29 December 2022 drawing.

How do I order the complete handle assembly (part# X8911-K) or get help?

You can add the complete handle assembly (part# X8911-K) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Complete Handle Assembly X8911-K”

Your email address will not be published. Required fields are marked *