Conical Washer 60508004

$1.99

Genuine OEM conical washer (part# 60508004) for Tornado floor scrubbers. It is the dished spring washer that keeps tension on a bolted joint as the parts settle and vibrate.

Genuine OEM conical washer (part# 60508004) for Tornado floor scrubbers — the machines it fits are listed below. It is the dished spring washer used at joints on the brush base transmission and elsewhere, where a fastener has to stay tight through heat cycling, settling and constant vibration.

A conical washer is not a flat washer with a bend in it. It is a spring: it is made to be compressed almost flat on assembly, and the force it stores keeps a clamp load on the joint as things move. That matters on a brush transmission because a bolted stack never quite stops moving — parts bed in, components warm up and cool down, and a loaded brush delivers a steady shake. A plain washer in that position holds its clamp load only as long as nothing settles; the moment it does, the joint loses tension and the fastener starts to walk.

Which way round it goes matters and is routinely got wrong. Fitted the correct way up it compresses as designed; fitted upside down or stacked wrongly it does very little, and the joint behaves as though the washer were not there. Follow the order the parts came off.

Replace rather than reuse. A conical washer that has been flattened and released a few times has lost free height and with it the force it was storing, and you cannot see that by eye — compare it to a new one. Replace it if it is cracked, corroded, or no longer springs back at all, and renew it as a matter of course whenever the joint is disturbed.

This is the genuine Tornado part at the correct size and spring rate.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U

This part is shared across 25 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base transmission drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does a conical washer (part# 60508004) do that a flat washer does not?

It is a spring. It is compressed almost flat on assembly and the force it stores keeps clamp load on the joint as parts bed in, heat cycle and vibrate — which is exactly when a plain washer lets the joint lose tension.

Does it matter which way up it goes?

Yes, and it is routinely got wrong. Fitted the correct way up it compresses as designed; upside down or wrongly stacked it does almost nothing and the joint behaves as though no washer were fitted. Reassemble in the order the parts came off.

Can I reuse a conical washer?

Better not to. One that has been flattened and released a few times has lost free height and the force it stored, and you cannot see that by eye — compare it against a new one. Renew it as a matter of course when the joint is disturbed.

How do I order the Conical Washer (part# 60508004) or get help?

You can add the Conical Washer (part# 60508004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the conical washer (part# 60508004) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does a conical washer (part# 60508004) do that a flat washer does not?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is a spring. It is compressed almost flat on assembly and the force it stores keeps clamp load on the joint as parts bed in, heat cycle and vibrate — which is exactly when a plain washer lets the joint lose tension.”}},{“@type”:”Question”,”name”:”Does it matter which way up it goes?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes, and it is routinely got wrong. Fitted the correct way up it compresses as designed; upside down or wrongly stacked it does almost nothing and the joint behaves as though no washer were fitted. Reassemble in the order the parts came off.”}},{“@type”:”Question”,”name”:”Can I reuse a conical washer?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Better not to. One that has been flattened and released a few times has lost free height and the force it stored, and you cannot see that by eye — compare it against a new one. Renew it as a matter of course when the joint is disturbed.”}},{“@type”:”Question”,”name”:”How do I order the Conical Washer (part# 60508004) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the Conical Washer (part# 60508004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Conical Washer 60508004”

Your email address will not be published. Required fields are marked *