Contact Flange 63499002

$2.99

Genuine OEM contact flange (part# 63499002) for Tornado floor scrubbers. It is the mounting collar that holds a contact block onto the back of a panel switch.

Genuine OEM contact flange (part# 63499002) for Tornado floor scrubbers — the machines it fits are listed below. It is the collar that clamps a contact block to the back of a panel switch, holding the two in the precise relationship they need.

Precise is the word. A panel switch works by moving a plunger a small, defined distance into its contact block. The flange is what fixes how far the block sits from the actuator, so if it is loose, cracked, or not fully latched, that distance changes — and the switch then operates late, early, or not at all. Because nothing looks broken, this is a fault people chase through contact blocks and switches before anyone pulls the assembly apart and finds a flange that has worked loose.

Vibration is what does it. A control panel shakes all day, and a flange that was snug when the machine was built gradually works back; the block then rattles slightly and the contacts start behaving intermittently. The plastic also becomes brittle with age and can crack at the latching tabs, usually when the assembly is next disturbed for service.

Check it whenever a panel switch is suspect: the block should be solidly held with no movement at all, and the latching tabs should be intact.

Fit a new flange rather than reusing one with a cracked or distorted tab. It is an inexpensive part, and the alternative is an intermittent electrical fault that reappears a few weeks after the machine goes back into service.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 26 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the control panel drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the contact flange (part# 63499002) do?

It clamps the contact block onto the back of a panel switch, fixing how far the block sits from the actuator — which is what determines whether the switch operates at the right point.

Can a loose flange cause an electrical fault?

Yes, and it is commonly missed. If the flange is loose or cracked, the plunger travel changes and the switch operates late, early or not at all. Nothing looks broken, so people replace contact blocks and switches first.

When should it be replaced?

Whenever a latching tab is cracked or distorted, or the block is not held solidly with no movement. The plastic becomes brittle with age and usually cracks when the assembly is next disturbed for service.

How do I order the Contact Flange (part# 63499002) or get help?

You can add the Contact Flange (part# 63499002) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the contact flange (part# 63499002) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Contact Flange 63499002”

Your email address will not be published. Required fields are marked *