Cord Hook X8013

$7.99

Genuine OEM cord hook (part# X8013) for Tornado and Powr-Flite commercial high-speed burnishers — the wrap hook the 75 ft power cord is coiled onto for transport and storage. Fits all Tornado Brute Force burnishers (see full list below).

The X8013 cord hook is the wrap point for the machine’s 75 foot power cord. It appears on every drawing in the Brute Force burnisher book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), on the current 14 July 2025 Brute Force 2000 Dust Control (98486) main body drawing and on the earlier 98486 main assembly.

A cord hook sounds like an accessory and behaves like a wear part. A 75 foot 12/3 cord is heavy, and the hook carries that whole weight every time the cord is wrapped, plus whatever load is applied when a cord is yanked off the hook in a hurry rather than unwound. Operators in a rush do that dozens of times a week, and the hook is what absorbs it.

Replace the X8013 if it is cracked, bent out so the cord slips off, broken at its mounting point, or if the mounting has pulled loose from the housing. A hook that no longer retains the cord is more than a nuisance: a coil that falls while the machine is being moved becomes something to trip over, and a cord dragged under the machine’s own wheels is how jackets get cut. If the mounting boss behind the hook has stripped, check the threaded insert (X1075) and the hardware at that callout as well.

Wrapping technique matters as much as the hook: a cord coiled in large loops rather than pulled tight around the hook lasts far longer, because tight wraps put a permanent set in the conductors near the strain relief. The hook is shared across the Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you want it listed. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.

Compatible Models

  • Tornado models:
  • Powr-Flite models:
    • B171
    • B172
    • B201
    • B202
    • C131
    • C131G
    • C171
    • C171HD
    • C171HDG
    • C171SD
    • C172
    • C201
    • C201HD
    • C202
    • C202G
    • NM1600
    • NM171HD
    • NM171SD
    • NM2000
    • NM2000DC
    • NM201HD
    • NM202

Frequently asked questions

What does the cord hook (part# X8013) do on a burnisher?

It is the wrap point the machine’s 75 foot power cord is coiled onto for transport and storage, carrying the full weight of the cord.

How do I know if my X8013 cord hook needs replacing?

Replace it if it is cracked, bent open so the cord slips off, broken at the mounting, or if the mounting has pulled loose from the housing.

Does it matter how I wrap the cord?

Yes. Coiling in large loose loops is much kinder to the cord than pulling tight wraps around the hook, which puts a permanent set in the conductors near the strain relief and shortens cord life.

What models is the cord hook (part# X8013) compatible with?

All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).

How do I order the cord hook (part# X8013) or get help?

You can add the cord hook (part# X8013) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Cord Hook X8013”

Your email address will not be published. Required fields are marked *