Drive Direction Manipulator 63407001
$113.99
Genuine OEM drive direction manipulator (part# 63407001) for Tornado floor scrubbers. It is the lever control that selects forward and reverse.
Genuine OEM drive direction manipulator (part# 63407001) for Tornado floor scrubbers — compatible machines are listed below. It is the lever-type control on the panel that the operator uses to select forward and reverse, and on most machines to modulate speed within each direction.
It is the single control the operator touches most, and the one the machine’s behaviour depends on most directly. Everything about how a machine feels to drive — whether it creeps smoothly away or lurches, whether reverse is controllable in a tight aisle — comes down to this component translating hand movement into a clean signal.
So the faults matter. A manipulator that does not return reliably to its centre, off position is a safety defect: the machine should stop when the operator lets go, and a sticky or weak return spring means it may not. A worn internal element gives a jumpy or surging drive, or a dead band where the lever moves and nothing happens. And a cracked body or a bent lever, usually from an impact or from the machine being pushed by its controls, lets water and dust into a component that is not built to tolerate them.
Before replacing, check the simple things: that the lever is not fouling the panel, that nothing is trapped behind it, and that its connector is sound and dry. A corroded connector produces exactly the intermittent drive symptoms people blame on the manipulator.
Test the centre-off return deliberately: release the lever from full travel in each direction and confirm the machine stops every time.
Compatible Models
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 11 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the control panel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the drive direction manipulator (part# 63407001) do?
It is the lever control that selects forward and reverse, and on most machines modulates speed within each direction. It is what translates the operator’s hand movement into a drive signal.
The machine does not always stop when I let go. Is this the control?
It can be — a sticky or weak return to centre-off. Treat it as a safety defect and take the machine out of service until it is fixed. Test deliberately: release the lever from full travel in each direction and confirm the machine stops every time.
The drive is jumpy or has a dead band. What should I check first?
The connector, before the control itself. A corroded connector produces exactly those intermittent symptoms. Also check the lever is not fouling the panel and nothing is trapped behind it. If all that is sound, the internal element is worn.
How do I order the Drive Direction Manipulator (part# 63407001) or get help?
You can add the Drive Direction Manipulator (part# 63407001) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the drive direction manipulator (part# 63407001) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet