Elbow Fitting 62320020
$25.99
Genuine Tornado elbow fitting (part# 62320020) — fits 23 Tornado scrubber models including the BDSO 27/28. Turns a hose run through 90 degrees without kinking it.
Genuine Tornado elbow fitting, part number 62320020, used on 23 Tornado scrubber models including the BDSO 27/28. The elbow turns a hose run through ninety degrees in a space too tight for the hose to bend on its own. Without it, the hose kinks — and a kinked hose on the vacuum side costs pickup while a kinked solution hose starves the deck.
Elbows crack rather than wear. The stress concentrates at the bend, and on a machine that vibrates all day a hairline crack grows until it opens under load. On the vacuum side that is an invisible air leak: the crack is on the suction side so nothing drips, and pickup falls with no outward sign. On the solution side it weeps, usually down the inside of the machine where it is noticed much later than it should be.
Check the elbow whenever a hose is off. Flex it gently and look along the outside of the bend for a line opening up, and check both spigots for grip. Replace the clamps with it; a clamp that has been over-tightened onto a cracked elbow has usually distorted and will not seal on the new one.
Call 763-535-0770 if you are tracing a vacuum leak and want help narrowing down which fitting on the drawing you are looking at.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 22 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the elbow fitting do?
It turns a hose run through ninety degrees in a space too tight for the hose to bend without kinking.
Can a cracked elbow cause weak pickup with nothing visible?
Yes. On the vacuum side the crack is on the suction side, so it draws air in rather than leaking out — pickup falls with nothing to see.
What models is the elbow fitting (part# 62320020) compatible with?
Tornado lists it on 23 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.
How do I order the elbow fitting (part# 62320020) or get help?
You can add the elbow fitting (part# 62320020) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the elbow fitting (part# 62320020) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet