Eye Support 63714002

$1.99

Genuine OEM eye support (part# 63714002) for Tornado floor scrubbers. It is the eyelet-style bracket on the rear housing that anchors a hose or cable run so it stays clear of moving parts.

Genuine OEM eye support (part# 63714002), used across a wide range of Tornado floor scrubbers — the full machine list is below. On the rear cover assembly it is the eyelet bracket mounted to the rear housing, through which a hose or cable run is anchored so it keeps to its intended path.

The rear of a scrubber is a congested place. Hose runs from the squeegee, wiring to the rear lights and sensors, and the drain line all share that space with the recovery tank and the rear wheels. The eye supports keep each run where it belongs. Lose one and the run it was holding sags into something it should never touch — a wheel, a hot motor housing, or a pinch point that closes every time the squeegee lifts.

What goes wrong: the eye cracks at the fastener hole, the eyelet opens up so whatever ran through it can escape, or corrosion weakens the bracket until it bends under load. Visual signs are a hose or cable loop hanging lower on one side than the other, chafe marks or a bright polished patch on the run near where it should be supported, and a bracket that can be flexed by hand when it should be rigid.

Inspect the supports whenever the rear cover is off, which is often the only time anybody sees them. Replace any that are cracked, opened or distorted, and follow the run they hold to look for chafe damage further along — a support that has been broken for a while usually means something else has been rubbing for a while too.

This is the genuine Tornado part, sized to its mounting and its eyelet, so the run it anchors sits exactly where the machine was designed to put it.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 32/26 — 99732
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U

This part is shared across 18 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the rear cover drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the eye support (part# 63714002) do on a Tornado floor scrubber?

It is the eyelet bracket on the rear housing that anchors a hose or cable run, holding it to its intended path so it stays clear of wheels, hot surfaces and pinch points.

How do I know if the eye support (part# 63714002) needs replacing?

Replace it if it is cracked at the fastener hole, if the eyelet has opened so the run can escape, or if corrosion has weakened it enough to flex by hand. A hose or cable loop hanging lower than it should is the usual first sign.

Should I check anything else when I replace one?

Yes. Follow the run it anchors and look for chafe marks or a bright polished patch. A support that has been broken for a while almost always means something has been rubbing for a while too.

How do I order the Eye Support (part# 63714002) or get help?

You can add the Eye Support (part# 63714002) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the eye support (part# 63714002) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Eye Support 63714002”

Your email address will not be published. Required fields are marked *