Find genuine Tornado BDSO 27/28 replacement parts for Models 99786 and 99786C. Can’t find your part? Call us at 763-535-0770.
Find the item number on the drawing, then match it to the same number in the table below that drawing. Each table lists the part description and Tornado’s part number for every numbered item on that sheet.
Rear Cover Drawing
Tornado publishes one drawing for this assembly, covering every BDSO 27/28 serial number.
1. Rear Housing – 2151110010. Lock Washer – 7CL00211. Screw M6 x 35 – 6011061912. Lower Support Cover – 2151107013. Washer – 6030600714. Lock Washer – 7CL00215. Screw M6 x 20 – 6011061216. Screw M6 x 20 – 6011061217. Lock Washer – 7CL00218. Washer – 6030600719. Screw M6 x 20 – 601106122. Saddle Support – 6371400120. Lock Washer – 7CL00221. Washer – 6030600722. Screw M6 x 20 – 6011061223. Lock Washer – 7CL00224. Washer – 6030600725. Upper Support Cover – 215110603. Screw M5.2 x 19 – 601905034. Rear Cover – 215110505. Screw M3.9 x 14 – 601903106. Eye Support – 637140027. Spacer – 470150208. Spacer – 470150309. Washer – 60306007The rear cover encloses the back of the BDSO 27/28 — the panel itself, its latch or catch hardware, hinges where fitted, and the fasteners that hold it. It is opened more often than any other cover on the machine, for battery access and for service, which is why its latches and hinges wear out while the panel is still sound. A cover that no longer latches will rattle itself and its mounting points apart. Tornado publishes one rear cover drawing for all BDSO 27/28 serial numbers, so there is no serial-number question on this assembly.
| # | Image | Part Description | Part Number | Price |
|---|---|---|---|---|
| 1 | ![]() | Rear Housing | 21511100 | $399.99 |
| 2 | ![]() | Saddle Support | 63714001 | $1.99 |
| 3 | Screw M5.2 x 19 | 60190503 | Call 763-535-0770 | |
| 4 | Rear Cover | 21511050 | Call 763-535-0770 | |
| 5 | ![]() | Screw M3.9 x 14 | 60190310 | $1.99 |
| 6 | ![]() | Eye Support | 63714002 | $1.99 |
| 7 | Spacer | 47015020 | Call 763-535-0770 | |
| 8 | Spacer | 47015030 | Call 763-535-0770 | |
| 9 | ![]() | Washer | 60306007 | $1.99 |
| 10 | ![]() | Lock Washer | 7CL002 | $2.99 |
| 11 | ![]() | Screw M6 x 35 | 60110619 | $1.99 |
| 12 | Lower Support Cover | 21511070 | Call 763-535-0770 | |
| 13 | ![]() | Washer | 60306007 | $1.99 |
| 14 | ![]() | Lock Washer | 7CL002 | $2.99 |
| 15 | ![]() | Screw M6 x 20 | 60110612 | $1.99 |
| 16 | ![]() | Screw M6 x 20 | 60110612 | $1.99 |
| 17 | ![]() | Lock Washer | 7CL002 | $2.99 |
| 18 | ![]() | Washer | 60306007 | $1.99 |
| 19 | ![]() | Screw M6 x 20 | 60110612 | $1.99 |
| 20 | ![]() | Lock Washer | 7CL002 | $2.99 |
| 21 | ![]() | Washer | 60306007 | $1.99 |
| 22 | ![]() | Screw M6 x 20 | 60110612 | $1.99 |
| 23 | ![]() | Lock Washer | 7CL002 | $2.99 |
| 24 | ![]() | Washer | 60306007 | $1.99 |
| 25 | Upper Support Cover | 21511060 | Call 763-535-0770 |
Frequently Asked Questions About the Tornado BDSO 27/28 Rear Cover
My rear cover will not stay closed. Do I need the whole cover?
Usually not. The latch and catch hardware are separate parts on this drawing and are the components that wear. Replace the panel only when the panel or its mounting points are damaged.
Why does the rear cover matter on a scrubber?
It keeps spray and debris off the batteries and the components behind it, and it keeps the battery compartment closed during operation. A cover left off or left unlatched is both a reliability and a safety problem.
Is this the same cover as the lower cover?
No. They are separate assemblies with separate drawings. The rear cover closes the back of the machine; the lower cover closes the underside.
Not sure which rear cover part your machine takes? Call 763-535-0770 with the serial number from the data plate, or stop in at 5415 West Broadway, Crystal, MN 55428 — we have sold and serviced commercial floor equipment since 1956. You can also go back to all Tornado BDSO 27/28 parts diagrams or browse the Tornado BDSO 27/28 parts category.








