Self-Tapping Screw 3.9 x 14 60190310
$1.99
Genuine Tornado self-tapping screw, 3.9 × 14 mm (part# 60190310) — fits 4 Tornado scrubber models including the BDSO 27/28. Secures light components into plastic bosses.
Genuine Tornado self-tapping screw, 3.9 by 14 mm, part number 60190310, used on 4 Tornado scrubber models including the BDSO 27/28. It is the shorter self-tapper on the recovery tank group, used where a light component is fixed into a shallow plastic boss that a longer screw would punch straight through.
Length is the whole specification here. Fitting the 19 mm screw in a 14 mm location is one of the easiest mistakes to make from a mixed tray of hardware, and on a tank component it usually means the point breaks through the far wall — which either cracks the moulding or puts a hole in something meant to hold water. If a screw suddenly runs in further than it should, stop and check the part number against the drawing before you drive it home.
Replace any self-tapper with a rounded drive rather than fighting it; a cam-out on a plastic boss normally ends with the head shearing off and the stub needing to be drilled. Start the screw by hand so it picks up its existing thread, and stop as soon as it seats.
Call 763-535-0770 if you want the correct screw for a specific location on the drawing rather than guessing from a tray.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 4 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What size is this self-tapping screw?
3.9 mm diameter by 14 mm long — Tornado part number 60190310.
Does the length really matter on a self-tapper?
Yes. In a shallow plastic boss a screw that is too long breaks through the far wall, which cracks the moulding or puts a hole in a part meant to hold water.
What models is this screw (part# 60190310) compatible with?
Tornado lists it on 4 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.
How do I order this screw (part# 60190310) or get help?
You can add the self-tapping screw 3.9 × 14 (part# 60190310) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the self-tapping screw 3.9 x 14 (part# 60190310) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet