Find genuine Tornado BDSO 27/28 replacement parts for Models 99786 and 99786C. Can’t find your part? Call us at 763-535-0770.
Find the item number on the drawing, then match it to the same number in the table below that drawing. Each table lists the part description and Tornado’s part number for every numbered item on that sheet.
Recovery Tank — Up to S/N 18005006
This drawing covers machines up to serial number 18005006.
1. Screw M3.9 x 14 – 6019031010. Rod w/Plate – 2011006011. Float Filter – 4790001012. Float – 2011007013. Filter w/Float Assembly – V011000714. Filter Protector – 2141002015. Screw M5 x 12 – 6014051216. Handwheel – 6170500317. Ring Nut – 6234009018. Drain Hose 38.2 x 950 – 4761008019. Drain Plug Assembly – V01100082. Hose Clip – 6194000720. Parallel Pin – 6060400421. Drain Plug Lever – 6182000322. Drain Hose Plug Tie Rod – 2011017023. Drain Hose Plug Cover – 2011013024. Drain Hose Plug – 2011015025. Drain Hose Plug Bottom – 2011014026. Washer – 6030600827. Lock Nut – 6022060428. Guide – 2141003029. Washer – 603060073. Recovery Tank Cover – 2151001030. Lock Washer – 7CL00231. Screw M6 x 20 – 6011061232. Screw M5 x 12 INOX – 6011050333. Lock Washer – 6050500334. Washer INOX – 6030500735. Hinge – 2141005036. Recovery Tank (99786) – 4731542037. Squeegee Hose – 4761048038. Elbow Fitting – 623200204. Washer INOX – 603050075. Lock Washer – 605050036. Screw M5 x 12 INOX – 601105037. Hose Clamp – 619300058. Vacuum Hose – 476104909. Tank Cover Gasket – 21510020The recovery tank holds the dirty water the squeegee pulls off the floor, and almost everything on this drawing exists to keep that water where it belongs or to get it out again — the tank, its lid and lid gasket, the float or shut-off that protects the vacuum motor, the drain hose and its cap, and the strainer. A hardened lid gasket is the single most common cause of weak vacuum pickup on a machine whose vacuum motor is perfectly healthy. Tornado revised this assembly at S/N 18005007; both drawings carry 38 callouts but the parts are not identical.
Recovery Tank — From S/N 18005007
This drawing covers machines from serial number 18005007 forward.
1. Screw M3.8 x 19 INOX – 6019031910. Rod w/Plate – 2011006011. Float Filter – 4790001012. Float – 2011007013. Filter w/Float Assembly – V011000714. Filter Protector – 2141002015. Screw M5 x 12 – 6014051216. Handwheel – 6170500317. Ring Nut – 6234009018. Drain Hose 38.2 x 950 – 4761008019. Drain Plug Assembly – V01100082. Hose Clip – 6194000720. Parallel Pin – 6060400421. Drain Plug Lever – 6182000322. Drain Hose Plug Tie Rod – 2011017023. Drain Hose Plug Cover – 2011013024. Drain Hose Plug – 2011015025. Drain Hose Plug Bottom – 2011014026. Washer – 6030600827. Lock Nut – 6022060428. Guide – 2141003029. Washer – 603060073. Recovery Tank Cover – 2151001030. Lock Washer – 7CL00231. Screw M6 x 20 – 6011061232. Screw M5 x 12 INOX – 6011050333. Lock Washer – 6050500334. Washer INOX – 6030500735. Hinge – 2141005036. Recovery Tank – 4731502037. Squeegee Hose – 4761048038. Elbow Fitting – 623200204. Washer INOX – 603050075. Lock Washer – 605050036. Screw M5 x 12 INOX – 601105037. Hose Clamp – 619300058. Vacuum Hose – 476104909. Tank Cover Gasket – 21510020Frequently Asked Questions About the Tornado BDSO 27/28 Recovery Tank
My scrubber leaves water on the floor but the vacuum motor sounds strong. What should I check?
The recovery tank lid gasket first. When it hardens it stops sealing, the system loses vacuum at the tank instead of at the squeegee, and pickup goes soft with no change in motor sound. After that, check the drain hose cap and the squeegee itself.
What does the float in the recovery tank do?
It shuts off airflow when the tank fills, which keeps dirty water out of the vacuum motor. If it sticks open you risk destroying the motor; if it sticks closed you lose pickup with a half-empty tank.
Which recovery tank drawing matches my machine?
Machines up to S/N 18005006 use the earlier drawing and machines from S/N 18005007 forward use the later one. Both are shown here in serial order.
Not sure which recovery tank part your machine takes? Call 763-535-0770 with the serial number from the data plate, or stop in at 5415 West Broadway, Crystal, MN 55428 — we have sold and serviced commercial floor equipment since 1956. You can also go back to all Tornado BDSO 27/28 parts diagrams or browse the Tornado BDSO 27/28 parts category.






























