Ring Nut 62340090
$14.99
Genuine Tornado ring nut (part# 62340090) — fits 16 Tornado scrubber models including the BDSO 27/28. Clamps a bulkhead fitting against the tank wall.
Genuine Tornado ring nut, part number 62340090, used on 16 Tornado scrubber models including the BDSO 27/28. The ring nut threads onto a bulkhead fitting and clamps it against the tank wall with its seal between. It is what holds a tank penetration watertight, and it is almost always the part damaged when one leaks.
Ring nuts are made to be tightened by hand and are routinely tightened with pliers instead. That is what cracks them — a hairline split through one of the grip lugs, often invisible until the nut is off. A cracked ring nut cannot hold even clamping pressure, so the seal behind the fitting grips on one side and the joint weeps steadily down the inside of the tank wall.
Replace the nut whenever you disturb a bulkhead fitting that has been leaking, and replace the seal with it. Tighten it by hand until the seal compresses and no further; if the joint will not seal by hand, the fault is the seal, the flange face or the nut — never more force.
Call 763-535-0770 if you want the ring nut, the fitting and its seal together; they are separate part numbers on this drawing and they are usually replaced as a set.
Compatible Models
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 15 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the ring nut do?
It threads onto a bulkhead fitting and clamps it against the tank wall, holding the seal that keeps the penetration watertight.
My tank weeps around a fitting even after a new seal. Why?
Check the ring nut for a hairline crack through a grip lug — usually from being tightened with pliers. A cracked nut cannot clamp evenly, so the new seal grips on one side only.
What models is the ring nut (part# 62340090) compatible with?
Tornado lists it on 16 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.
How do I order the ring nut (part# 62340090) or get help?
You can add the ring nut (part# 62340090) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the ring nut (part# 62340090) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet