Drain Plug Lever 61820003

$6.99

Genuine Tornado drain plug lever (part# 61820003) — fits 27 Tornado scrubber models including the BDSO 27/28. Tightens and releases the recovery tank drain plug by hand.

Genuine Tornado drain plug lever, part number 61820003, used on 27 Tornado scrubber models including the BDSO 27/28. The lever is what the operator turns to expand the drain plug in the hose, and it is the only part of the plug assembly designed to be gripped. Everything else in that assembly depends on the lever being able to apply torque.

Levers fail from the leverage they exist to provide. The arm cracks at its root, or the square or splined socket that engages the tie rod rounds off, and from that point the plug cannot be tightened properly no matter how hard the operator tries. What follows is predictable: the plug seeps, the machine loses a little vacuum through the drain line, and someone starts forcing the plug in with a twist of the hose, which stretches the hose end and turns a cheap repair into a hose.

Replace the lever when the arm is cracked, when the socket slips on the rod, or when it simply will not stay tight. Check the tie rod thread at the same time — a corroded rod is usually what broke the lever, and fitting a new lever to a seized rod breaks it again.

Call 763-535-0770 if you want the whole plug assembly — lever, tie rod, cover, rubber and bottom piece are all separate part numbers on this drawing.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 26 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the drain plug lever do?

It is the handle the operator turns to expand the recovery tank drain plug inside the hose, applying the torque the plug needs to seal.

My drain plug will not tighten and the lever slips. What is wrong?

Either the socket in the lever has rounded off or the tie rod thread has corroded. Replace the lever and check the rod — a new lever on a seized rod will fail the same way.

What models is the drain plug lever (part# 61820003) compatible with?

Tornado lists it on 27 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order the drain plug lever (part# 61820003) or get help?

You can add the drain plug lever (part# 61820003) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the drain plug lever (part# 61820003) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Drain Plug Lever 61820003”

Your email address will not be published. Required fields are marked *