Recovery Tank Drain Hose Plug 20110150
$5.99
Genuine Tornado rubber drain hose plug (part# 20110150) — fits 17 Tornado scrubber models including the BDSO 27/28. Seals the recovery tank drain hose between emptying cycles.
Genuine Tornado rubber drain hose plug, part number 20110150, used on 17 Tornado scrubber models including the BDSO 27/28. It seals the end of the recovery tank drain hose, and it is one of the few parts on a scrubber that gets handled by an operator every single shift. That handling, not age, is what wears it out.
A drain plug that no longer seals produces a complaint that rarely gets traced back to the plug: the machine seems to lose vacuum pickup for no reason. The drain hose is on the vacuum side of the recovery tank, so a plug that leaks air bleeds the vacuum away from the squeegee exactly as a split hose or a hardened lid gasket would. Operators also notice dirty water weeping onto the floor where the machine is parked, which is the same plug failing in the other direction.
Replace it when the rubber has hardened, the sealing lip has flattened, or it has to be forced to stay in. Do not keep a plug in service by wrapping tape round it — tape changes the diameter, stretches the hose end, and turns a cheap fix into a hose replacement. Rinse the plug and the hose end when you drain the tank; detergent film is what hardens the rubber.
Call 763-535-0770 if you want to check the plug and its tie rod and cover together — they are separate part numbers and they usually wear as a set.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 17 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the rubber drain hose plug do?
It seals the end of the recovery tank drain hose so the tank holds vacuum and dirty water stays in the tank between emptying cycles.
Can a worn drain plug really cause weak pickup?
Yes. The drain hose is on the vacuum side of the tank, so a plug that leaks air bleeds vacuum away from the squeegee just like a split hose or a hardened lid gasket.
What models is the drain hose plug (part# 20110150) compatible with?
Tornado lists it on 17 machines, including the BDSO 27/28 stand-on scrubber. The full list is above; call us if your machine is not on it.
How do I order the drain hose plug (part# 20110150) or get help?
You can add the drain hose plug (part# 20110150) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the recovery tank drain hose plug (part# 20110150) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet