Recovery Tank Drain Hose 38.2 x 950 mm 47610080

$53.99

Genuine Tornado recovery tank drain hose, 38.2 mm bore × 950 mm (part# 47610080) — fits 3 Tornado scrubber models including the BDSO 27/28.

Genuine Tornado recovery tank drain hose, 38.2 mm bore by 950 mm long, part number 47610080, used on 3 Tornado scrubber models including the BDSO 27/28. This is the hose the operator pulls out to empty the recovery tank, and because it is handled every shift and dragged across concrete it wears faster than any other hose on the machine.

Two failures matter. The end splits or stretches where the plug is forced in and out, and once the end has stretched no drain plug will seal in it — which is why a machine that leaks at the drain after a new plug usually needs a hose, not another plug. The other is a split along the length, often hidden on the underside where the hose drags. Because the drain line is on the vacuum side of the tank, a split there bleeds vacuum and costs pickup even when the plug is perfect.

Check the hose end for an oval or flared mouth and run your hand along the full length looking for splits and soft spots. Support the hose in its clip rather than letting it hang; a hose carrying its own weight at the tank fitting is a hose that will split at the fitting.

The drain plug assembly — cover, rubber, bottom piece and tie rod — are separate part numbers on this drawing. Call 763-535-0770 if you want them together.

Compatible Models

This part is shared across 3 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What are the dimensions of this drain hose?

It is 38.2 mm bore by 950 mm long, Tornado part number 47610080.

I fitted a new drain plug and it still leaks. What now?

Check the hose end. Once it has stretched or gone oval from the plug being forced in and out, no plug will seal in it — the hose is the part that needs replacing.

What models is the drain hose (part# 47610080) compatible with?

Tornado lists it on 3 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order the drain hose (part# 47610080) or get help?

You can add the drain hose (part# 47610080) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the recovery tank drain hose 38.2 x 950 mm (part# 47610080) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Recovery Tank Drain Hose 38.2 x 950 mm 47610080”

Your email address will not be published. Required fields are marked *