Screw M6 x 20 60110612
$1.99
Genuine Tornado screw, M6 × 20 mm (part# 60110612) — fits 24 Tornado scrubber models including the BDSO 27/28. A structural fastener used across tank and frame mountings.
Genuine Tornado screw, M6 by 20 mm, part number 60110612, used on 24 Tornado scrubber models including the BDSO 27/28. M6 is the workhorse thread on these machines and this length turns up wherever a bracket, guide or tank component is bolted to structure rather than to thin plastic.
Length matters more than people expect. Too short and the thread engagement is marginal, so the joint relies on friction and works loose under vibration; too long and the screw bottoms in a blind hole, which feels tight while clamping nothing at all. A joint that keeps loosening after being re-tightened has usually been fitted with the wrong length at some point in its life.
Replace screws with rounded drives, burred heads or any visible stretch in the shank. Fit the washer and lock washer the drawing calls for — the fastener stack is specified as a set and leaving a washer out changes the clamp load the joint was designed around. Tighten evenly where several screws share a flange so the component pulls down square.
Call 763-535-0770 if you are unsure whether your assembly takes the 20 mm or a different length; several M6 lengths appear on this machine.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado 99694 — TS350-W20-U
This part is shared across 24 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What size is this screw?
M6 thread by 20 mm long — Tornado part number 60110612.
My bolted joint keeps working loose. Is the screw at fault?
Usually the length or the washer stack. A screw that is too short has marginal thread engagement, one that is too long bottoms in a blind hole and clamps nothing, and a missing lock washer changes the clamp load the joint was designed around.
What models is this screw (part# 60110612) compatible with?
Tornado lists it on 24 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.
How do I order this screw (part# 60110612) or get help?
You can add the screw M6 × 20 (part# 60110612) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the screw m6 x 20 (part# 60110612) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet