Tornado BDSO 27/28 Recovery Tank Cover Gasket 21510020

$16.99

Genuine Tornado recovery tank cover gasket (part# 21510020) for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. The seal that holds vacuum at the tank lid.

The recovery tank cover gasket is the seal between the tank lid and the tank on a Tornado BDSO 27/28. If you only ever replace one part on the recovery system, make it this one. It is the single most common cause of weak pickup on a machine whose vacuum motor, squeegee blades and hoses are all in good order.

The reason is simple physics. The vacuum motor pulls against the whole tank, and the lid is the largest sealing surface on it. A gasket that has hardened, flattened or taken a permanent set no longer conforms to the lid, and air bleeds in across the full length of that seal. From the operator’s position the symptom is identical to a worn squeegee: water left behind, with a motor that sounds exactly as strong as it always did. New blades get fitted, nothing improves, and the real cause is a strip of rubber costing a fraction of the blades.

Check it with the machine running and the squeegee down: run a hand along the lid seam and feel for air being drawn in. Or just look at the gasket — a good one is pliable and springs back when pressed; one that stays compressed where the lid clamps it is finished. Clean the sealing face each time you rinse the tank, because detergent film is what hardens the rubber.

Call 763-535-0770 if you are chasing weak pickup and want the right order to check things in. We have been servicing commercial floor equipment at 5415 West Broadway in Crystal since 1956.

Compatible Models

See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the recovery tank cover gasket do?

It seals the tank lid to the recovery tank so the vacuum motor can hold vacuum across the whole system.

My pickup is weak but the motor sounds fine and the blades are new. What should I check first?

This gasket. It is the largest sealing surface in the vacuum path, and when it hardens it bleeds air along its whole length — which feels exactly like a worn squeegee from the operator’s position.

What models is the recovery tank cover gasket (part# 21510020) compatible with?

Tornado lists it for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. Call us if you need us to check it for another Tornado machine.

How do I order the recovery tank cover gasket (part# 21510020) or get help?

You can add the recovery tank cover gasket (part# 21510020) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the recovery tank cover gasket (part# 21510020) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 27/28 Recovery Tank Cover Gasket 21510020”

Your email address will not be published. Required fields are marked *