Hose Clamp 61930005
$6.99
Genuine Tornado hose clamp (part# 61930005) — fits 24 Tornado scrubber models including the BDSO 27/28. Secures vacuum and solution hoses at their fittings.
Genuine Tornado hose clamp, part number 61930005, used on 24 Tornado scrubber models including the BDSO 27/28. It secures hoses to their fittings on both the vacuum and solution sides of the machine. It is the smallest part in any hose joint and the one that decides whether the joint holds.
On the vacuum side a clamp that has lost tension does not drip, which is what makes it hard to find: it bleeds air at the cuff and costs pickup while everything looks dry and intact. On the solution side the same failure drips, which at least announces itself, usually onto something below that would rather stay dry. Clamps lose tension from corrosion, from being over-tightened once and distorted, and from being re-used on a hose that has since been trimmed shorter.
Replace rather than re-tighten a clamp that has been nipping into the hose, and always replace a clamp that has visible corrosion on the band or the screw. Fit it square to the fitting barb and tighten until the hose is gripped, not until the band bites — a clamp cutting into the hose is making the next leak.
These are inexpensive enough to keep a few on the shelf. Call 763-535-0770 if you want to confirm the size against your hose before ordering.
Compatible Models
- Tornado 18″ BR 18/11 — 99685
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 23 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does this hose clamp do?
It secures vacuum and solution hoses onto their fittings so the joint holds pressure or vacuum.
Can a loose clamp cause weak pickup without any visible leak?
Yes. On the vacuum side a clamp that has lost tension bleeds air at the cuff with nothing to see — no drip, no mark, just lost pickup.
What models is the hose clamp (part# 61930005) compatible with?
Tornado lists it on 24 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.
How do I order the hose clamp (part# 61930005) or get help?
You can add the hose clamp (part# 61930005) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the hose clamp (part# 61930005) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet