Handle Lock Clamp X1456
$25.99
Genuine OEM handle lock clamp (part# X1456) for Tornado and Powr-Flite commercial high-speed burnishers — the clamp that the cam lever draws together to hold the handle at the set angle. Fits all Tornado Brute Force burnishers (see full list below).
The X1456 handle lock clamp is the part that actually grips when you throw the cam lever on a Brute Force burnisher. It appears on every drawing in the book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on the current and earlier Brute Force 2000 Dust Control (98486) drawings, grouped with the cam lever assembly (X1184), the slotted cam washer (X8028) and the handle brace (X1464).
The clamp and the lever are a pair: the lever provides the over-centre action and the clamp provides the friction surface that holds the handle where the operator set it. On a burnisher the handle angle is not a comfort setting — it determines how the machine’s weight sits on the pad, which is what controls gloss. A handle that will not stay put changes pad pressure mid-pass and leaves an uneven finish.
Replace the X1456 when the clamping faces are worn smooth or grooved, when the clamp is cracked or spread, or when a new cam lever still will not hold the handle. The common sequence is that the lever is replaced first, the handle still creeps, and the clamp turns out to be the worn part — so if you are already ordering a lever on a machine with years of service, consider doing both at once and saving the second teardown.
Also inspect the slotted cam washer (X8028) while you are there; it is a low-cost part that sits in the same load path. The handle lock clamp is shared across the Brute Force line and carries no model name. Call 763-535-0770 with your model and serial number if you want us to confirm the clamp set before you order. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.
Compatible Models
- Tornado models:
- 17″ — 97562B
- 20″ — 97564B
- 17″ — 97590
- 20″ 1.5 HP M Series — 97595
- Brute Force 1600 — 98458B
- 17″ 1.5 HP — 98476
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- 20″ 1.5 HP — 98484
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
- Powr-Flite models:
- C131
- C171
- C171HD
- C171SD
- C172
- C201
- C201HD
- C202
- NM1600
- NM171HD
- NM171SD
- NM2000
- NM2000DC
- NM201HD
- NM202
Frequently asked questions
What does the handle lock clamp (part# X1456) do on a Brute Force burnisher?
It provides the friction surfaces that the cam lever draws together, holding the handle at the angle the operator set so pad pressure stays consistent.
How do I know if my X1456 handle lock clamp needs replacing?
Replace it if the clamping faces are worn smooth or grooved, if the clamp is cracked or spread open, or if a new cam lever still will not stop the handle from creeping.
I replaced the cam lever and the handle still drops — what now?
That is the usual sign the handle lock clamp is worn. The lever supplies the action, the clamp supplies the grip; replace the X1456 clamp and check the slotted cam washer (X8028) as well.
What models is the handle lock clamp (part# X1456) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the handle lock clamp (part# X1456) or get help?
You can add the handle lock clamp (part# X1456) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet