Handwheel 61712002
$15.99
Genuine OEM handwheel (part# 61712002) for Tornado floor scrubbers. It is the knob used to set squeegee adjustment by hand, and it replaces part# 61712001.
Genuine OEM handwheel (part# 61712002) for Tornado floor scrubbers — compatible machines are listed below. It is the hand-turned wheel on the squeegee assembly used to make an adjustment without tools, and it supersedes the earlier part# 61712001.
Tool-free adjusters exist so that adjustments actually get made. A squeegee needs setting — angle, height or blade pressure, depending on the fitting — and that setting drifts as rubber wears and parts bed in. If adjusting means finding a wrench, operators stop doing it and start living with a machine that streaks. So a handwheel that is cracked, spinning on its shaft, or seized is a maintenance problem beyond its own small cost.
Handwheels get used wet, with gloves, by people in a hurry, which is why they fail at the hub rather than anywhere else. The common faults are a split hub, a rounded or stripped drive feature so the wheel turns without moving the shaft, a seized thread from scale and dried detergent so the wheel will not turn at all, and simple impact damage from a knock at floor level.
Diagnose before replacing: a wheel that turns freely through its whole range with no effect points at a stripped drive or a disconnected shaft, not at a worn wheel. One that binds part-way usually means a scaled or damaged thread, which a new wheel will not fix — clean the thread first.
Note that this part replaces 61712001; if your parts list shows the older number, this is the current one.
Compatible Models
- Tornado BR 22/14 — 99695
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 18 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the squeegee drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the handwheel (part# 61712002) do?
It is the tool-free adjuster on the squeegee assembly, used to set the squeegee by hand. Tool-free matters because adjustments that need a wrench tend not to get made.
Does this replace part# 61712001?
Yes. This handwheel supersedes 61712001 — if your parts list shows the older number, this is the current part.
My handwheel turns but nothing moves. Is the wheel at fault?
Probably the drive. A wheel that turns freely through its whole range with no effect points at a stripped drive feature or a disconnected shaft. One that binds part-way usually means a scaled or damaged thread, which a new wheel will not fix.
How do I order the Handwheel (part# 61712002) or get help?
You can add the Handwheel (part# 61712002) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the handwheel (part# 61712002) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet