Hexagonal Spacer 62406024
$3.99
Genuine OEM hexagonal spacer (part# 62406024) for Tornado floor scrubbers. It stands a circuit board or panel off its mounting at a fixed height.
Genuine OEM hexagonal spacer (part# 62406024) for Tornado floor scrubbers — compatible machines are listed below. In the drive wheel control assembly it stands a board or panel off its mounting surface by a fixed distance, threaded at each end so it can be screwed down and have something screwed onto it.
The gap is the point. A circuit board mounted flat against metal is a board waiting to short out, and a board mounted flat against a panel has nowhere for air to move and nowhere for moisture to drain — on a scrubber, moisture always arrives eventually. The spacer sets that gap at the distance the design calls for, and because it is rigid it also stops the board flexing when a connector is pushed on, which is what cracks solder joints over time.
The hex shape matters for installation: it gives a spanner something to hold while the screw at the other end is tightened, so the spacer is not twisted against the board it is supporting.
Substituting a different height changes everything stacked above it — a board that sits too high can foul the cover, and one that sits too low loses its clearance. Order by part number.
Replace a spacer whose threads are stripped or cross-threaded, whose hex is rounded, or that is cracked or bent. Check for corrosion too: a spacer is often the electrical path to ground for a board’s mounting point, and a corroded one can produce an intermittent fault that looks like a failing board.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the drive wheel control drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the hexagonal spacer (part# 62406024) do?
It stands a circuit board or panel off its mounting by a fixed distance, threaded at both ends. That gap stops the board shorting against metal, lets air move and moisture drain, and stops the board flexing when a connector is pushed on.
Can I use a spacer of a different height?
No. Everything stacked above it depends on that distance — too high and the board fouls the cover, too low and it loses its clearance. Order by part number.
Could a spacer cause an electrical fault?
It can. A spacer is often the path to ground for a board’s mounting point, so a corroded one produces an intermittent fault that looks like a failing board. Check them for corrosion as well as for stripped threads and a rounded hex.
How do I order the Hexagonal Spacer (part# 62406024) or get help?
You can add the Hexagonal Spacer (part# 62406024) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the hexagonal spacer (part# 62406024) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet